CM602all_EJM8AESM_Service Manual - 第91页
88 Press (11) return key. 87 Select (10) Jig remove. 86 Select (9) Pick pos teach. Machine Installation Item Remark 85 Select (8) Jig setting Set the jig on PU No.27 . * The camera is installed right to the head; it can …
Select (7) Teach Posi L table. ⇒ Change it to "Teach Posi R table.
"
Select (6) Pickup pos teach.
Select (5) Jig setting Set the jig on the PU No.2
.
* Reason for setting on PU
No.2
The recognition camera
cannot move to PU No.1.
Select the desired stage. (4)
82
83
84
Installation Machine Installation
Item Remark
81
(4)
(5)
(6)
(7)
EJM8A-E-SMA020103-A01-00 Page 2-1-3-22
88
Press (11) return key.
87
Select (10) Jig remove.
86
Select (9) Pick pos teach.
Machine Installation
Item Remark
85
Select (8) Jig setting Set the jig on PU No.27
.
* The camera is installed
right to the head; it can be
positioned on the rightmost
position PU No. 27 when
the right table is taught.
Installation
(8)
(9)
(10)
(11)
EJM8A-E-SMA020103-A01-00 Page 2-1-3-23
the "Pickup position" window.
92
The "Nozzle exchange" window i
s
[Operation] Display the "Superimpose
"
window.displayed
.
91
Check the position of the nozzle recognition
hole. Select "Machine adjust
"
Select "Nozzle exchange.
"
90
The teaching results are reflected on
89
Select "Run."
Installation Machine Installation
Item Remark
[Judgment guidance]
The recognition mark
should cover the 1/3 of the
cross line.
[Preparation]
Remove the nozzles from
the nozzle changer.
[Preparation]
When changing nozzles,
set the nozzles on the
head.
(1)
(2)
EJM8A-E-SMA020103-A01-00 Page 2-1-3-24