CM602all_EJM8AESM_Service Manual - 第922页
Jigs Min. 35 kgs. 70 Min. Total Assembly/Adjustment Shuttle Tray Tray Phillips screwdriver #2 Allen key 3 mm Allen key 4 mm Ruler 150 mm Ruler 300 mm Teaching Tools 20 Connector jig Removal/Disassembly 15 Min. Part Weigh…
carry out machine parameter teaching.
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
13
Item Remarks
Shuttle Tray
Once the mechanical adjustment is complete,
Tray
EJM8A-E-SMA070107-A01-00
Page 7-1-7-5
Jigs
Min.
35
kgs.
70
Min.
Total
Assembly/Adjustment
Shuttle TrayTray
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Ruler 150 mm
Ruler 300 mm
Teaching
Tools
20
Connector jig
Removal/Disassembly
15
Min.
Part Weight
Min.
7-1-8 Shuttle Head Timing Belt Replacement
This section describes the procedures for replacing the shuttle head timing belt.
Dange
r
Warning
Caution
EJM8A-E-SMA070108-A01-00
Page 7-1-8-1
Shuttle TrayTray
1
Remarks
Switch off the power
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×10L Truss 2 pcs.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×15L Truss 2 pcs.
2
Allen key 3 mm
M4 x 10L 1 pc.
Open the cover of the delivery position. Open the maintenance door.
Remove the door switch connector.
Remove the cover holding screws.
Item
Remove the top cover.
3
4
Door switch of
Delivery position
EJM8A-E-SMA070108-A01-00
Page 7-1-8-2