CM602all_EJM8AESM_Service Manual - 第932页
Item Remarks Tray Secure the cables with a cable tie. 9 Remove the motor holding screws. Allen key 4 mm Screw M5 2 pcs. Allen key 4 mm Screw M5 2 pcs. Replace and install the motor. Connect the motor connector. 10 11 12 …
Nipper
Allen key 3 mm
M4×8L 3 pcs.
M4×10L 2 pcs.
M4×12L 2 pcs.
Loosen the motor shaft holding screws.
Disconnect the motor connector. Cut off the cable tie.
Allen key 3 mm
Allen key 4 mm
Screw M4 2 pcs.
Screw M5 2 pcs.
Loosen the tension and remove the belt.
Remove the motor shaft holder.
Remarks
Remove the cover from the motor section.
Item
5
6
7
8
Tray Shuttle Tray
Motor shaft holder
EJM8A-E-SMA070109-A01-00
Page 7-1-9-3
Item Remarks
Tray
Secure the cables with a cable tie.
9
Remove the motor holding screws.
Allen key 4 mm
Screw M5 2 pcs.
Allen key 4 mm
Screw M5 2 pcs.
Replace and install the motor.
Connect the motor connector.
10
11
12
Shuttle Tray
Allen key 1.5 mm
Setscrew M3
Nipper
Tighten the motor shaft holding screws.
EJM8A-E-SMA070109-A01-00
Page 7-1-9-4
Measure the distance from the dog to the mechanical stopper.
Install the motor shaft holder.
Tension the belt.
Item Remarks
13
Allen key 3 mm
Allen key 4mm
Screw M4 2 pcs.
Screw M5 2 pcs.
Switch on the power.
Fit the jig on the door switch
connector.
15
Carry out "Return to origin."
(Be sure to keep yourself off the drive section.)
16
Distance from Dog to
Stopper:
9.5 mm ±1 mm
14
Tray Shuttle Tray
Motor axis holder
3
6.5 36.5
(30)
4.5
731.5
727st
－O/R
StrokeOrigin
＋O/R
Mechanical
stopper
Dog
＋soft limit －soft limit
EJM8A-E-SMA070109-A01-00
Page 7-1-9-5