CM602all_EJM8AESM_Service Manual - 第948页
Tray Shuttle Tray 3 4 Remove the connector from the right side of the box. 2 1 Item Remove all connectors from the front board. Phillips precision screwdriver Connector screw Remove the front and the side covers from the…
Tray Shuttle Tray
7-1-12 Extension-axis Driver Replacement
Tool
Jig
50
Min.
30 Min.
This section describes the procedures for replacing the extension-axis driver.
Total Time Part Weight
Teaching
Assembly/AdjustmentRemoval/Disassembly
0
Min. Min.
20
None
Phillips screwdriver #2
Precision screwdriver
Nipper
Allen key M4
kgs
2.0
Dange
r
Warning
Caution
EJM8A-E-SMA070112-A01-00
Page 7-1-12-1
Tray Shuttle Tray
3
4
Remove the connector from the right side of the box.
2
1
Item
Remove all connectors from the front board.
Phillips precision
screwdriver
Connector screw
Remove the front and the side covers from the control box.
Phillips screwdriver #2
Screw M4 4 pcs.
90578
Power down the machine.
Remarks
EJM8A-E-SMA070112-A01-00
Page 7-1-12-2
Tray Shuttle Tray
Cut off the cable ties on the right side.
Pull out the box. Remove the driver connectors.
6
7
8
Be careful not to let the
cables be caught.
Phillips precision
screwdriver
Connector screws
Remove the connectors.
Nipper
Cut off the front cable ties.
Remove the box holding screws.
Allen key 4 mm
Screw M5 2 pcs.
Open the front cover.
Phillips screwdriver #2
Item Remarks
5
EJM8A-E-SMA070112-A01-00
Page 7-1-12-3