CM602all_EJM8AESM_Service Manual - 第963页
Item 9 Once the mechanical adjustment is complete, carry out machine parameter teaching. Remarks See Section 7-1-2. "Shuttle Tray Pickup Position Teaching." Shuttle Tray Tray EJM8A-E-SMA070114-A01-00 Page 7-1-1…
7
bolts positioned at the rear side of the belt clamp section.
If it is necessary to adjust the distance more than 3 mm,
loosen the bolts below and move the belt.
Carry out "Return to origin." Check the distance.
5
8
Allen key 2.5 mm
Screw M3 2 pcs.
Adjustable distance:
+/- 3 mm
Remarks
Allen key 2.5 mm
Screw M3 2 pcs.
Phillips screwdriver #2
Truss M4 4 pcs.
Put the top cover back on.
To adjust the distance, loosen the
Tray
Item
6
Shuttle Tray
22
B
A=550 cm
(587)
C
D
E
(67)
(8.5)
(46.5)
EJM8A-E-SMA070114-A01-00
Page 7-1-14-3
Item
9
Once the mechanical adjustment is complete,
carry out machine parameter teaching.
Remarks
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
Shuttle TrayTray
EJM8A-E-SMA070114-A01-00
Page 7-1-14-4
Tray
Tool
Jig
Phillips screwdriver #2
Allen key 3 mm
Ruler 150 mm
Ruler 300 mm
Teaching
Min. Min.
kgs
Min.
Assembly/Adjustment
This section describes the procedures for replacing the timing belt for the transfer section.
Total Time Part Weight
Removal/Disassembly
0
Min.
Shuttle Tray
7-1-15 Transfer-Section Timing Belt Replacement
Dange
r
Warning
Caution
EJM8A-E-SMA070115-A01-00
Page 7-1-15-1