CM602all_EJM8AESM_Service Manual - 第966页
Move it along the arrow and loosen the tension. Move it along the arrow and tension the belt. Tray Item Allen key 2.5 mm M3 4 pcs. Install the belt clamp for the transfer head. Remark Shuttle Tray Allen key 2.5 mm M3 2 p…
Tray
2
1
Phillips screwdriver #2
Allen key 5 mm
Truss screw M4 4 pcs.
M6x30L 2 pcs.
Remark
Pull out the feeder change cart.
Allen key 2.5 mm
M3 4 pcs.
Allen key 2.5 mm
M3 2 pcs.
Remove the connector.
Item
Shuttle Tray
Remove the belt clamp from the transfer head.
bolt and the transfer section only.
If the "return-to-origin" operation cannot be carried out, remove the holding
Remove the motor holder.
3
4
EJM8A-E-SMA070115-A01-00
Page 7-1-15-2
Move it along the arrow and
loosen the tension.
Move it along the arrow and
tension the belt.
Tray
Item
Allen key 2.5 mm
M3 4 pcs.
Install the belt clamp for the transfer head.
Remark
Shuttle Tray
Allen key 2.5 mm
M3 2 pcs.
Fix the motor holding bracket in place.
Replace the belt.
Allen key 3 mm
M4 2 pcs.
Allen key 3 mm
M4 2 pcs.
Loosen the motor holding bracket.
8
Remove the belt.
Install the motor holder.
5
6
7
EJM8A-E-SMA070115-A01-00
Page 7-1-15-3
Tray Shuttle Tray
Carry out the "return-to-origin" operation.
With the feeder change cart removed, connect the connector.
When the distance is 3 mm or less, loosen the bolt placed on the back of the
Item Remark
12
Ruler
Stopper ⇒ Dog: 9.5 mm
belt clamp and adjust it.
10
11
9
Allen key 2.5 mm
Screw M3 2 pcs.
Adjustment gap: ±3 mm
Measure the distance between the mechanical stopper and the dog.
5510(22)
3
558
550st
－O/R
StrokeOrigin
＋O/R
Mechanical
stopper
Dog
＋soft limit －soft limit
5
EJM8A-E-SMA070115-A01-00
Page 7-1-15-4