CM602all_EJM8AESM_Service Manual - 第968页

Tray Item Remark 13 again. Measure the clearance again. 14 Phillips screwdriver #2 Truss screw 4 pcs. Allen key 2.5 mm Screw M3 2 pcs. Shuttle Tray 16 See Section "7-1-2. Shuttle Tray Teaching." 15 Put the uppe…

100%1 / 1093
Tray Shuttle Tray
Carry out the "return-to-origin" operation.
With the feeder change cart removed, connect the connector.
When the distance is 3 mm or less, loosen the bolt placed on the back of the
Item Remark
12
Ruler
Stopper ⇒ Dog: 9.5 mm
belt clamp and adjust it.
10
11
9
Allen key 2.5 mm
Screw M3 2 pcs.
Adjustment gap: ±3 mm
Measure the distance between the mechanical stopper and the dog.
5510(22)
3
558
550st
－O/R
StrokeOrigin
＋O/R
Mechanical
stopper
Dog
＋soft limit －soft limit
5
EJM8A-E-SMA070115-A01-00
Page　7-1-15-4
Tray
Item Remark
13
again. Measure the clearance again.
14
Phillips screwdriver #2
Truss screw 4 pcs.
Allen key 2.5 mm
Screw M3 2 pcs.
Shuttle Tray
16
See Section "7-1-2.
Shuttle Tray Teaching."
15
Put the upper cover back on.
Carry out the "return-to-origin" operation
After the adjustment, teach machine parameters.
If it is necessary to adjust the distance more than 3 mm,
loosen the bolts below and move the belt.
22
B
A=550st
(587)
C
D
E
(67)
(8.5)
(46.5)
EJM8A-E-SMA070115-A01-00
Page　7-1-15-5
7-1-16 Head LED Sensor Replacement
Shuttle TrayTray
This section describes the procedures for replacing the head LED sensor.
Total Part Weight
Assembly/AdjustmentRemoval/Disassembly
78
Min.
15
Pickup position adjustment
jig
Nozzle jig
Allen key 2.5 mm
Allnen key 3 mm
Phillips screwdriver #2
Nipper
Teaching
Tools
Jigs
Min. Min. kgs.
30
Min.
Dange
r
Warning
Caution
EJM8A-E-SMA070116-A01-00
Page　7-1-16-1