CM602all_EJM8AESM_Service Manual - 第972页
Shuttle Tray Tray 10 11 12 heads. Lower the pickup head. Position the pickup and the transfer Remarks 9 Fit the jigs on the pickup head. Item Press [Bst shutle pick up head1 down], [Bst shuttle pick up head2 down] and [B…
Tray Shuttle Tray
5
6
7
8
Lightly fix the sensor in place.
Item Remarks
Install a new sensor.
Secure the cables with a cable tie.
Mount the jig.
Remove the sheet from the transfer unit.
Switch on the power.
Do not touch these
screws.
EJM8A-E-SMA070116-A01-00
Page 7-1-16-3
Shuttle TrayTray
10
11
12
heads.
Lower the pickup head.
Position the pickup and the transfer
Remarks
9
Fit the jigs on the pickup head.
Item
Press [Bst shutle pick up head1 down], [Bst shuttle pick up head2 down]
and [Bst shttle Tray spot ight].
9.5 mm from
mechanical
stopper
150.0 mm
from
mechanical
stopper
EJM8A-E-SMA070116-A01-00
Page 7-1-16-4
Lower the shaft and
turn on the light.
Tray Shuttle Tray
15
Fix the sensor in place.
14
16
Remove the top cover.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
M4 x 10L 8 pcs.
Item Remarks
13
Align the sensor LED with the hole of the jig.
Press [Bst shutle pick up head1 down], [Bst shuttle pick up head2 down]
and [Bst shttle Tray spot ight].
P
Do not touch
these screws.
EJM8A-E-SMA070116-A01-00
Page 7-1-16-5