CM602all_EJM8AESM_Service Manual - 第973页
Lower the shaft and turn on the light. Tray Shuttle Tray 15 Fix the sensor in place. 14 16 Remove the top cover. Phillips screwdriver #2 Allen key 3 mm Screw M4 2 pcs. M4 x 10L 8 pcs. Item Remarks 13 Align the sensor LED…
Shuttle TrayTray
10
11
12
heads.
Lower the pickup head.
Position the pickup and the transfer
Remarks
9
Fit the jigs on the pickup head.
Item
Press [Bst shutle pick up head1 down], [Bst shuttle pick up head2 down]
and [Bst shttle Tray spot ight].
9.5 mm from
mechanical
stopper
150.0 mm
from
mechanical
stopper
EJM8A-E-SMA070116-A01-00
Page 7-1-16-4
Lower the shaft and
turn on the light.
Tray Shuttle Tray
15
Fix the sensor in place.
14
16
Remove the top cover.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
M4 x 10L 8 pcs.
Item Remarks
13
Align the sensor LED with the hole of the jig.
Press [Bst shutle pick up head1 down], [Bst shuttle pick up head2 down]
and [Bst shttle Tray spot ight].
P
Do not touch
these screws.
EJM8A-E-SMA070116-A01-00
Page 7-1-16-5
Tray Shuttle Tray
See Section 7-1-2 "Shuttle
Tray Pickup Position
Teaching."
Remarks
Carry out the 'Pickup position" teaching.
Item
17
+
-
EJM8A-E-SMA070116-A01-00
Page 7-1-16-6