CM602all_EJM8AESM_Service Manual - 第980页

Remove the cover holding screws. To use the shuttle tray, change the cover When the NAVI system is installed, remove the power unit from the BR right stage. Allen key 2.5 mm To secure space in which the STCV 1 cable is c…

100%1 / 1093
Nipper
Replace the current cable with the standard cable.(2 pcs. for each stage)
Tray Shuttle Tray
14
Item
13
Air Tube Layout
Remarks
15
16
Duct example:
TRY.S
A
Non-
used
Non-
used
N2-N5
N1-N9
POWER
UNIT#1
POWER
UNIT#2
CPU BOX
AR
BF
BR
AF
EJM8A-E-SMA070117-A01-00 Page　7-1-17-5
Remove the cover holding screws.
To use the shuttle tray, change the cover
When the NAVI system is installed, remove
the power unit from the BR right stage.
Allen key 2.5 mm
To secure space in which the STCV 1
cable is connected.
pull it out along the horizontal arrow.
Remarks
Remove the Y-motor cover from the rear side
.
Hold it along the vertical arrows and
Tray Shuttle Tray
Phillips screwdriver #2
Allen key 3 mm
M4 button head screw 4
pcs.
M4 screw 6 pcs.
Item
Remove the emergency stop button
20
17
and the cover.
Remove the connector screws.
19
18
EJM8A-E-SMA070117-A01-00 Page　7-1-17-6
Layout of Signal Cable 2 to AR Left Ring I/O
Layout of Signal Cable 2 to BR Left Ring I/O
Connect the power cable to the
rear side of the power unit.
Power unit 1 TYR.P1
Power unit 2 TYR.P2
91060:
A stage tray
communication cable 2
91070:
B stage tray
communication cable 2
Tray Shuttle Tray
Connect the transfer unit communication cable.
Remarks
22
23
21
24
Item
Remove the upper side
cover
Secure the cable,
positioning it outside the
frame.
NF0ECX#4
91060
STCV11
NF0ECX#3
91030
STCV1
OUT0
IN1
IN2
STCV21
NF0ECX#7NF0ECX#8
91070
91040
STCV2
OUT0
IN1
IN2
STVC11
IN2/1
OUT0
STVC21
IN2/1
OUT0
EJM8A-E-SMA070117-A01-00 Page　7-1-17-7