CM602all_EJM8AESM_Service Manual - 第986页
Fix the bracket in place. Turn on the power. Shuttle Tray 41 Fit the connectors and the joints. Item Connect a short connector to the signal cable for the unused stage. (Otherwise, the monitor will be locked.) Select the…
Put the machine side covers back on.
Philli
p
s screwdriver #2
stages on the rear side.
Put the side covers back on all the
Remarks
Allen key 4 mm
M5 x 12 mm 4 pcs x 4
Thick washer 4 pcs x 4
Put all lower chutes back on.
Phillips screwdriver #2
Button head screw 6mm
4 pcs.
(3 pcs on AF)
38
40
39
37
Tray Shuttle Tray
Item
Put the lower box covers back on.
Left chute
installing section
Right chute
installing
section
EJM8A-E-SMA070117-A01-00 Page 7-1-17-11
Fix the bracket in place.
Turn on the power.
Shuttle Tray
41
Fit the connectors and the joints.
Item
Connect a short connector
to the signal cable for the
unused stage. (Otherwise,
the monitor will be
locked.)
Select the stage on which the shuttle
Set "Shuttle Tray" to "Use."
tray will be installed. (AR or BR）
Change the specifications.
42
Tray
44
43
Remarks
Tray power
Tray signal
cable
Tray air joint
EJM8A-E-SMA070117-A01-00 Page 7-1-17-12
For the procedures from this step onwar
d
see "Installing the Shuttle Tray Feeder"
Section 7-1-1
"Installing the Shuttle Tray
Feeder"
46
Connect the shuttle tray.
Tray Shuttle Tray
After changing the shuttle tray setting,
Item Remarks
45
power down and power up the machine.
EJM8A-E-SMA070117-A01-00 Page 7-1-17-13