CM602all_EJM8AESM_Service Manual - 第991页

Be careful not let the cable be caught. Tray Shuttle Tray Item Remark 9 Pull out the control box. Insert the rear side of the control box into the bracket. Fix the control box in place. Connect the four driver connectors…

100%1 / 1093
Item
5
Tray Shuttle Tray
Cut off the cable ties on the front side.
Phillips screwdriver #2
Remove the four driver connectors.
Remark
Remove the screws.
Pull the door open.
Phillips screwdriver #1
Allen key 3 mm
Nipper
Screw M4 2 pcs.
Remove all right-side connectors.
6
7
8
EJM8A-E-SMA070118-A01-00
Page　7-1-18-3
Be careful not let the cable be
caught.
Tray Shuttle Tray
Item Remark
9
Pull out the control box.
Insert the rear side of the control
box into the bracket.
Fix the control box in place.
Connect the four driver connectors.
Phillips screwdriver #1
10
11
12
EJM8A-E-SMA070118-A01-00
Page　7-1-18-4
Be careful not to let the cables be
caught.
Tray Shuttle Tray
Item Remark
13
Secure the driver cables with cable
ties.
Nipper
Connect the right-side connectors.
15
Close the door.
Fix it in place.
Phillips screwdriver #2
16
Connect the connectors on the
front side of the board.
14
EJM8A-E-SMA070118-A01-00
Page　7-1-18-5