User Manual - SIPLACE Glue Feedeer - 第24页
3 Initial Operation 3.1 Inserting the Cartridge 24 User Manual SIPLACE Glue Feeder 05/2020 3.1 Inserting the Cartridge Two sizes of cartridge can be used with the Glue Feeder. ► Adjust the cartridge holder to the size of…
3 Initial Operation
User Manual SIPLACE Glue Feeder 05/2020 23
3 Initial Operation
NOTICE
Preconditions
Furthermore, the machine at which you want to use the Glue Feeder must already be fitted
with a connection to the safety circuit and a connection to the compressed air supply
WARNING
Protective clothing
Wear your personal protective clothing (protective goggles and gloves) for all work using or
on the Glue Feeder.
NOTICE
Calibrating the temperature regulation at all Glue Feeders
When taking a new Glue Feeder into operation in a production environment which already
uses other Glue Feeders, we recommend calibrating the temperature regulation of all Glue
Feeders. Calibrate with the "Glue Feeder calibration device" (item no. 03214618-xx), see
4.3.3
"Calibrating the temperature regulation" [}64].
The following steps must be completed in the prescribed order for setting up the Glue Feeder for
operation:
●
Insert the glue cartridge into the Glue Feeder
●
Place the Glue Feeder onto the setup location
●
Connect the Glue Feeder to the machine safety circuit
●
Connect the Glue Feeder to the machine compressed air supply
●
Predose the Glue Feeder i.e. distribute the glue in the glue unit (feed pipe, jet block and dis-
penser nozzle)
3 Initial Operation
3.1 Inserting the Cartridge
24 User Manual SIPLACE Glue Feeder 05/2020
3.1 Inserting the Cartridge
Two sizes of cartridge can be used with the Glue
Feeder.
► Adjust the cartridge holder to the size of the cart-
ridge to be used (10 or 30 ml).
1. Then pull out the cartridge holder.
2. Turn the cartridge holder so that the required size
is at the top.
3. Let the cartridge holder engage audibly.
► Screw the front cap off the cartridge.
► Remove the back cap from the cartridge.
► Hold the cartridge against the feed pipe and
screw it on to the pipe straight.
3 Initial Operation
3.1 Inserting the Cartridge
User Manual SIPLACE Glue Feeder 05/2020 25
► Fit the cartridge adapter at the straight points
onto the back of the cartridge and press on as far
as the stop.
► Turn the cartridge adapter clockwise as far as the
stop.
► Make sure that the O-ring on the cartridge adap-
ter is completely flush against the inside of the
cartridge and seals it. If not, the required cart-
ridge pressure will not form.
To make it easier to insert the adapter with the
O‑ring, you can grease the O-ring slightly (Tur-
motemp II/400 CL2).
NOTICE
Predosing
Although you have inserted the cartridge, the Glue Feeder is still not ready for use. You first
need to position the Glue Feeder at the required location and pre-dose the glue unit (feed
pipe, jet block and dispenser nozzle) i.e. fill it with glue.