User Manual - SIPLACE Glue Feedeer - 第49页
4 Operation 4.2 Individual Functions in Stations Software 706.1 and Higher User Manual SIPLACE Glue Feeder 05/2020 49 ► Enable both of the options shown and click on Accept . The process will begin. The SIPLACE Vision re…
4 Operation
4.2 Individual Functions in Stations Software 706.1 and Higher
48 User Manual SIPLACE Glue Feeder 05/2020
4.2.3 Checking and Teaching Component Shapes and Glue Dot Inspections
► Switch over to the main view of the station software.
► Click on the Feeders, Components and ... icon. (1)
► On the right-hand side, click on the Check and Teach Component Shapes icon. (2)
The Processing Options (3) column shows an icon if the relevant component shape has been set
for gluing.
► From the overview, select the component shape to be edited and then click on Test Compon-
ent. (4)
4 Operation
4.2 Individual Functions in Stations Software 706.1 and Higher
User Manual SIPLACE Glue Feeder 05/2020 49
► Enable both of the options shown and click on Accept.
The process will begin. The SIPLACE Vision results view will then be shown.
► Click on the Measurement Options icon. (1)
4 Operation
4.2 Individual Functions in Stations Software 706.1 and Higher
50 User Manual SIPLACE Glue Feeder 05/2020
► To edit the parameters shown, click on Edit Parameters. (1)
The Glue Dot Wizard will open.
In this dialog box, you can select the lighting with which you want to perform glue dot measure-
ment. To improve your measurement results, you can search for the optimum glue dot lighting.
For more information about this dialog box, refer to the online documentation for SIPLACE Vision.