User Manual - SIPLACE Glue Feedeer - 第86页
5 Cleaning and Maintenance 5.5 Replacing the Cartridge 86 User Manual SIPLACE Glue Feeder 05/2020 5.5.2 Inserting the Cartridge Two sizes of cartridge can be used with the Glue Feeder (10 or 30 ml). ► Adjust the cartridg…
5 Cleaning and Maintenance
5.5 Replacing the Cartridge
User Manual SIPLACE Glue Feeder 05/2020 85
5.5 Replacing the Cartridge
5.5.1 Removing the Cartridge
► Place the glue feeder down on a firm surface.
► Hold the cartridge tightly with one hand.
► Turn the cartridge adapter anticlockwise by about
90°.
► Press the cartridge adapter towards the back and
pull it off.
► Unscrew the cartridge from the cartridge pipe
thread.
5 Cleaning and Maintenance
5.5 Replacing the Cartridge
86 User Manual SIPLACE Glue Feeder 05/2020
5.5.2 Inserting the Cartridge
Two sizes of cartridge can be used with the Glue
Feeder (10 or 30 ml).
► Adjust the cartridge holder to the size of the cart-
ridge to be used.
1. Then pull out the cartridge holder.
2. Turn the cartridge holder so that the required size
is at the top.
3. Let the cartridge holder engage audibly.
If you want to use a different size of cartridge to that
which is set, you will need to also replace the cartridge
holder.
► Pull the hose off the cartridge adapter.
► Fit the hose as far as the stop onto the corres-
ponding cartridge adapter for your size of cart-
ridge.
► Fix the hose with a cable tie.
► Screw the front cap off the cartridge.
► Remove the back cap from the cartridge.
5 Cleaning and Maintenance
5.5 Replacing the Cartridge
User Manual SIPLACE Glue Feeder 05/2020 87
► Hold the cartridge against the cartridge pipe and
screw it on to the pipe straight.
► Fit the cartridge adapter at the straight points
onto the back of the cartridge and press on as far
as the stop.
► Turn the cartridge adapter clockwise onto the
cartridge, as far as the stop.
► Make sure that the O-ring on the cartridge adap-
ter is completely flush against the inside of the
cartridge and seals it. If not, the required working
pressure will not form.
To make it easier to insert the adapter with the
O‑ring, you can grease the O-ring slightly (Tur-
motemp II/400 CL2).
NOTICE
Predosing
Although you have inserted the cartridge, the Glue Feeder is still not ready for use. You first
need to position the Glue Feeder at the required location and predose the glue unit (cart-
ridge pipe, jet block and dispenser nozzle) i.e. fill it with glue. For a detailed description,
refer to section 3.5
"Predosing the Glue Feeder" [}30].