FUJI错误代码查询 - 第1169页
------------------------------ Code: 18020029 Display: KIT Server communications not enabled. Used by: Cause: No communication has been established with the KIT Server. The KIT Server may be off, or the network cabling m…
Cause: Fujitrax-Verifier has reported that production cannot continue because the low quantity limit has
been reached.
The parameter indicates the target slot number.
Remedy: Resupply parts to the feeder that has reached the low quantity limit (indicated at the device
check screen).
------------------------------
Code: 18020016
Display: Fujitrax-Verifier splicing warning.
Used by:
Cause: Fujitrax-Verifier has reported that production cannot continue because of a splicing warning.
The parameter indicates the target slot number.
Remedy: Splice new parts to the feeder at the target slot.
------------------------------
Code: 18020024
Display: Changeover database error.
Used by:
Cause: An error has occurred at the Kitting Station changeover database.
Remedy: Perform maintenance on the Kitting Station changeover database.
------------------------------
Code: 18020025
Display: Changeover not initiated.
Used by:
Cause: Changeover preparations have not been carried out at the Kitting Station for the supply unit
specified at the Handy Terminal.
The parameter indicates the target unit number.
Remedy: Perform changeover preparations again at the Kitting Station, or carry out a device check again
at the machine.
------------------------------
Code: 18020026
Display: Changeover supply unit mismatch.
Used by:
Cause: The supply unit for which changeover preparations were carried out at the Kitting Station does
not match the unit specified at the Handy Terminal.
The parameter indicates the target unit number.
Remedy: Move the supply unit to the specified stage.
To continue operation, perform a device check again at the machine.
------------------------------
Code: 18020027
Display: Changeover incomplete.
Used by:
Cause: Changeover preparations for the supply unit specified at the Handy Terminal are not complete.
Remedy: Complete the device checks for any feeders for which verification is not completed at the device
check screen.
------------------------------
Code: 18020028
Display: Fujitrax-Verifier communications timeout.
Used by:
Cause: Communications with the KIT Server have timed out.
An error has occurred at the KIT Server, or communication between the KIT Server and the machine
has been cut.
Remedy: Check the KIT Server.
第 1168 页
------------------------------
Code: 18020029
Display: KIT Server communications not enabled.
Used by:
Cause: No communication has been established with the KIT Server.
The KIT Server may be off, or the network cabling may be disconnected.
Remedy: Check the KIT Server and the network cabling.
------------------------------
Code: 18020030
Display: Communication error
Used by:
Cause: An error occurred during communication with Fujitrax Verifier.
Remedy: Restart the KIT Server.
------------------------------
Code: 18020031
Display: Data format error
Used by:
Cause: The reported data format is incorrect.
Remedy: Load the correct data.
------------------------------
Code: 18020069
Display: HOST通信产生错误
Used by:
Cause: FujiTrax和客户端HOST没有建立通信。
Remedy: 请确认FujiTrax和客户端HOST的连接状态后重新开始操作。如果还是无法解决，请在收集追踪数据后与本
公司客服中心联系。
------------------------------
Code: 18020101
Display: Fujitrax Verifier vision processing error
Used by:
Cause: A vision processing error was reported by Fujitrax Verifier.
The parameter indicates the target slot number.
Remedy: Check the parts at the target slot and perform a device check at the machine or Fujitrax Verifier.
------------------------------
Code: 18020102
Display: Fujitrax Verifier pick-up error
Used by:
Cause: A pick-up error was reported by Fujitrax Verifier.
The parameter indicates the target slot number.
Remedy: Check the parts at the target slot and perform a device check at the machine or Fujitrax Verifier.
------------------------------
Code: 18020103
Display: Fujitrax System Error
Used by:
Cause: Due to transmission trouble with Fujitrax(KIT Server, FLP, etc), production cannot start.
Remedy: Confirm that KIT Server and FLP are operating correctly.
------------------------------
Code: 18020300
Display:
Used by:
Cause:
第 1169 页
Remedy:
------------------------------
Code: 18020301
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 18020302
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 18020303
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 18090069
Display: 在线异常
Used by: SECS/GEM
Cause: 存在非在线状态的机器。
比较所设定的生产线机器数和成为在线状态的机器数，存在没有进行在线处理(S1F13/S1F14)的机器时，对所有机器
进行异常通知。
Remedy: 请对所有机器进行一次在线处理。
------------------------------
Code: 18091003
Display: 初期化异常
Used by:
Cause: 比较SECS/GEM为有效状态的机器数和正常完成SECS/GEM初期化的机器数，存在因设定错误等原因而不
一致时，对所有机器进行异常通知。
Remedy: 请确认SECS/GEM的各种设定。
------------------------------
Code: 18095010
Display: S7F5时PPID的格式化异常
Used by: SECS/GEM
Cause: 从主机接受的S7F5的PPID的格式化不正确。
Remedy: 请使用正确的格式化进行指定。
------------------------------
Code: 18095030
Display: LOG ON异常
Used by: SECS/GEM
Cause: 不能登录到Fuji Flexa上。
Remedy: 请确认许可证、PPID的服务器名等。
------------------------------
Code: 18095050
Display: 远程指令LOG ON异常
Used by: SECS/GEM
Cause: 不能登录到Fuji Flexa上。
第 1170 页