FUJI错误代码查询 - 第1187页
Used by: Cause: The image was not acquired by the line scan camera. The movement of the part being vision processed stopped during image acquisition. Remedy: Machine operation halted while the image was being acquired. R…
Cause: There is a file system initialize error.
Remedy: If this error occurs often, contact Fuji.
------------------------------
Code: 1C420027
Display:
Used by:
Cause: There is a file deletion error.
Remedy: If this error occurs often, contact Fuji.
------------------------------
Code: 1C420028
Display:
Used by:
Cause: Unable to find file.
Remedy: If this error occurs often, contact Fuji.
------------------------------
Code: 1C420029
Display:
Used by:
Cause: Delete command error.
Remedy: If this error occurs often, contact Fuji.
------------------------------
Code: 1C420030
Display:
Used by:
Cause: Transmit command error.
Remedy: If this error occurs often, contact Fuji.
------------------------------
Code: 1C450003
Display: 1C450003
Used by:
Cause: This is a common error for debugging. (Assertion failure)
Remedy: The image has not been acquired. Check the camera. Check the size of the background disk of
the nozzle.
------------------------------
Code: 1C680001
Display: 1C680001
Used by:
Cause: The image was not acquired by the line scan camera. The movement speed of the part being
vision processed was too fast.
Remedy: Reduce the movement speed of the part in question when the image is being acquired.
------------------------------
Code: 1C680002
Display: 1C680002
Used by:
Cause: The image was not acquired by the line scan camera. The direction of movement of the part being
vision processed rotated in the reverse direction during the acquisition of the image.
Remedy: This error does not occur with version V2.43 and later versions. Check the version of the vision
processing software being used and carry out a software upgrade if necessary.
------------------------------
Code: 1C680003
Display: 1C680003
第 1186 页
Used by:
Cause: The image was not acquired by the line scan camera. The movement of the part being vision
processed stopped during image acquisition.
Remedy: Machine operation halted while the image was being acquired. Rectify the cause of this
stoppage and then carry out vision processing again.
------------------------------
Code: 1C680004
Display: 1C680004
Used by:
Cause: The image was not acquired by the line scan camera. The movement of the part being vision
processed stopped during image acquisition.
Remedy: Machine operation halted while the image was being acquired. Rectify the cause of this
stoppage and then carry out vision processing again.
------------------------------
Code: 1C680005
Display: 1C680005
Used by:
Cause: Image acquisition failed.
Remedy: An image could not be acquired from the line scan camera. The machine was disabled while
acquiring the image. Correct the problem, then repeat the operation.
------------------------------
Code: 1C680006
Display: 1C680006
Used by:
Cause: Image acquisition failed.
Remedy: An image could not be acquired from the line scan camera. The specified acquisition area
(range) may be too large. Specify a smaller acquisition area.
------------------------------
Code: 1C680FFF
Display: 1C680FFF
Used by:
Cause: Image acquisition failed.
Remedy: An image could not be acquired from the line scan camera. An unexpected error occurred while
acquiring the image.
------------------------------
Code: 1CA00001
Display: 1CA00001
Used by:
Cause: Parts are not being picked up.
Remedy: Check that the parts feeder is in place and that the parts have not run out. Also check that the
nozzle being used can pick up the parts.
------------------------------
Code: 1CA00002
Display: 1CA00002
Used by:
Cause: The size of the part is excessively different from the size set in part data.
Remedy: Check that the correct part size is registered in part data. If the size difference is large, increase
the tolerance values.
------------------------------
Code: 1CA00003
Display:
第 1187 页
Used by:
Cause: The lead pitch is much narrower than the value entered in Part data.
Remedy: Enter the correct value in Part data.
------------------------------
Code: 1CA00004
Display: 1CA00004
Used by:
Cause: A lead is bent.
Remedy: A lead is bent in excess of the tolerance set in Pitch_limit in part data.
------------------------------
Code: 1CA00005
Display: 1CA00005
Used by:
Cause: There is not enough contrast between the part and its background for vision processing.
Remedy: Check the fluorescent plate on the nozzle sticker and the condition of the lighting system.
------------------------------
Code: 1CA00006
Display: 1CA00006
Used by:
Cause: Part data has not been registered.
Remedy: Failed to register part data. Check if part data and vision type setting are correct. If part data is
correct, the vision system may be faulty. Contact Fuji.
------------------------------
Code: 1CA00007
Display: 1CA00007
Used by:
Cause: The resolution is incorrect.
Remedy: The resolution is set to "0" or lower. Check Proper data.
------------------------------
Code: 1CA00008
Display: 1CA00008
Used by:
Cause: The nozzle center is incorrect.
Remedy: The nozzle center is outside the permissible range. Check Proper data.
------------------------------
Code: 1CA00009
Display: 1CA00009
Used by:
Cause: Nozzle data is incorrect.
Remedy: The nozzle type or backlight type is incorrect, or the nozzle size is set to zero or less. Check
Nozzle data.
------------------------------
Code: 1CA0000A
Display: 1CA0000A
Used by:
Cause: The direction setting is incorrect.
Remedy: The direction setting can be set between 1 and 8. Check the setting.
------------------------------
Code: 1CA0000B
Display: 1CA0000B
Used by:
第 1188 页