FUJI错误代码查询 - 第1242页

Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too uneven. There is foreign matter stuck to the part. Remedy: Check the camera, vision processing board, cable and foc…

100%1 / 5282
Code: 1D010028
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010029
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D01002A
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D01002B
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010030
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010031
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010032
Display:
Used by:
第 1241 页
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010033
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010034
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010035
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010036
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010037
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010038
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
第 1242 页
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D010039
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D01003A
Display:
Used by:
Cause: Vision processing cannot take a correct part image. The upper and lower parts of the part are too
uneven. There is foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Place these parts with Computer
Vision #6. Make sure foreign matter is not stuck to the parts.
------------------------------
Code: 1D018002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D018100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D018110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D018111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D018112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D018113
第 1243 页