FUJI错误代码查询 - 第173页

Code: 11022A23 Display: Same as code Used by: QP242,QP201,QP202,QP203 Cause: The "PLM? VP board No. (QP2)" setting (which indicates the number of the vision processing board that the LSO board is connected to) …

------------------------------

Code: 11022A1D

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The board quantity specified for vision processing is outside the valid range.

Remedy: Set a value from 1 to 6 for "The Number of Vision Processor (QP2)" in the Proper data.

------------------------------

Code: 11022A1E

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Parts Camera Type (QP2)" setting (which indicates the vision processing camera type)

is outside the valid range. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct camera type for the "PLM? Parts Camera Type (QP2)" parameter in the Proper

data.

------------------------------

Code: 11022A1F

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Mark Camera MPX ch. No. (QP2)" setting (which indicates the number of the

multiplexer port that the mark camera is connected to) either is outside the valid range, or duplicates

another setting. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct port number (a value from 1 to 12) for the "PLM? Mark Camera MPX ch. No.

(QP2)" parameter in the Proper data.

------------------------------

Code: 11022A20

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Parts Camera MPX ch. No. (QP2)" setting (which indicates the number of the

multiplexer port that the RS vision processing camera is connected to) either is outside the valid range, or

duplicates another setting. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct port number (a value from 1 to 12) for the "PLM? Parts Camera MPX ch. No.

(QP2)" parameter in the Proper data.

------------------------------

Code: 11022A21

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? LSO ch. No. (QP2)" setting (which indicates the number of the LSO board port that the

LS vision processing camera is connected to) either is outside the valid range, or duplicates another

setting. The value for the "?" in the parameter name indicates the module number.

Remedy: Set the correct port number (a value from 1 to 4) for the "PLM? LSO ch. No. (QP2)" parameter in

the Proper data.

------------------------------

Code: 11022A22

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? LSO board No. (QP2)" setting (which indicates the number of the LSO board that the

LS vision processing camera is connected to) is outside the valid range. The value for the "?" in the

parameter name indicates the module number.

Remedy: Set the correct board number (either 1 or 2) for the "PLM? LSO board No. (QP2)" parameter in

the Proper data.

------------------------------

第 172 页

Code: 11022A23

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? VP board No. (QP2)" setting (which indicates the number of the vision processing

board that the LSO board is connected to) is outside the valid range. The value for the "?" in the

parameter name indicates the module number.

Remedy: Set the correct board number (either 1 or 2) for the "PLM? VP board No. (QP2)" parameter in the

Proper data.

------------------------------

Code: 11022A24

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Camera? Scan Speed (QP2)" setting (which indicates the scan speed for the LS camera)

is outside the valid range. The value for the "?" in the parameter name indicates the module number and

camera number.

Remedy: Set the correct value (from 1 to 1000) for the "PLM? Camera? Scan Speed (QP2)" parameter in

the Proper data.

------------------------------

Code: 11022A25

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: The "PLM? Scan Offset Pulse (H,M,L) (QP2)" setting (which indicates the offset for the start of

scanning by the LS camera) is outside the valid range. The value for the "?" in the parameter name

indicates the module number.

Remedy: Set the correct value (from 1 to 60000) for the "PLM? Scan Offset Pulse (H,M,L) (QP2)" parameter

in the Proper data.

------------------------------

Code: 11022A26

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: No value has been set for the "PLM? Pickup Timer ,2,3 (QP2)" parameter, which determines how

long the head remains lowered during component pickup. The value for the "?" in the parameter

nameindicates the module number.

Remedy: Set a value for the "PLM? Pickup Timer ,2,3 (QP2)" in the Proper data.

------------------------------

Code: 11022A27

Display: Same as code

Used by: QP242,QP201,QP202,QP203

Cause: No value has been set for the "PLM? Placement Timer ,2,3 (QP2)" parameter, which determines

how long the head remains lowered during component placement. The value for the "?" in the parameter

name indicates the module number.

Remedy: Set a value for the "PLM? Placement Timer ,2,3 (QP2)" in the Proper data

------------------------------

Code: 11022A28

Display: Same as code

Used by: QP242

Cause: No value has been set for the "PLM? Feeding On Timer (QP2)" parameter, which determines how

long feeding by the IP-series feeder is turned on. The value for the "?" in the parameter name indicates the

module number.

Remedy: Set a value for the "PLM? Feeding On Timer (QP2)" in the Proper data

------------------------------

第 173 页

Code: 11022A29

Display: Same as code

Used by: QP242

Cause: No value has been set for the "PLM? Feeding Off Timer (QP2)" parameter, which determines how

long feeding by the IP-series feeder is turned off. The value for the "?" in the parameter name indicates the

module number.

Remedy: Set a value for the "PLM? Feeding Off Timer (QP2)" in the Proper data

------------------------------

Code: 11022A2A

Display: Same as code

Used by: QP242,QP202

Cause: The "PLM? PX In Convyr Speed (QP2)" setting (which determines the speed of the board conveyer

PX-axis during board loading) is outside the valid range. The value for the "?" in the parameter name

indicates the module number.

Remedy: Set a value from 38 to 1000 for the "PLM? PX In Convyr Speed (QP2)" parameter in the Proper

data.

------------------------------

Code: 11022A2B

Display: Same as code

Used by: QP242,QP202

Cause: The "PLM? PX Out Convyr Speed (QP2)" setting (which determines the speed of the board

conveyer PX-axis during board unloading) is outside the valid range. The value for the "?" in the

parameter name indicates the module number.

Remedy: Set a value from 38 to 1000 for the "PLM? PX Out Convyr Speed (QP2)" parameter in the Proper

data.

------------------------------

Code: 11022A2C

Display: Same as code

Used by: QP242,QP202

Cause: The "PLM? PX Red Convyr Speed (QP2)" setting (which determines the speed of the board

conveyer PX-axis during board deceleration) is outside the valid range. The value for the "?" in the

parameter name indicates the module number.

Remedy: Set a value from 5 to 37 for the "PLM? PX Red Convyr Speed (QP2)" parameter in the Proper

data.

------------------------------

Code: 11022A2D

Display: "Data check error [11022A2D]"

Used by: QP242,QP201,QP202,QP203

Cause: The number of the communication port to be used by the ID controller unit either has not been

set, or duplicates another setting.

Remedy: Check the number of the port being used and correct the setting.

------------------------------

Code: 11022A2E

Display: "Data check error [11022A2E]"

Used by: QP242

Cause: The number of the communication port to be used by the tape end sensor either has not been set,

or duplicates another setting.

Remedy: Check the number of the port being used and correct the setting.

------------------------------

Code: 11022A2F

Display: "Data check error [11022A2F]"

第 174 页