FUJI错误代码查询 - 第1753页
Code: 1D43401B Display: Same as code. Used by: Cause: No leads could be found. Remedy: Check the part's size and supply direction. ------------------------------ Code: 1D43401C Display: Same as code. Used by: Cause:…
Cause: The first lead on each side could not be found.
Remedy: Check the lead width, the part supply direction, and the image acquisition conditions.
------------------------------
Code: 1D43400D
Display: Same as code.
Used by:
Cause: The lead pitch is too wide, or the leads are too wide.
Remedy: Check the part's shape.
------------------------------
Code: 1D43400E
Display: Same as code.
Used by:
Cause: An error occurred during missing lead processing.
Remedy: Check the lead pitch and the part supply direction.
------------------------------
Code: 1D43400F
Display: Same as code.
Used by:
Cause: The lead pitch has exceeded the allowable range.
Remedy: Check the part's shape.
------------------------------
Code: 1D434010
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434011
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434012
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434016
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
Code: 1D434019
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
第 1752 页
Code: 1D43401B
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
Code: 1D43401C
Display: Same as code.
Used by:
Cause: No leads could be found.
Remedy: Check the part's size and supply direction.
------------------------------
Code: 1D43401D
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D43401F
Display: Same as code.
Used by:
Cause: Too many leads were found.
Remedy: Check the part's shape and supply direction.
------------------------------
Code: 1D434020
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D434021
Display: Same as code.
Used by:
Cause: The part's outline could not be found.
Remedy: Check the part's shape and the image acquisition conditions.
------------------------------
Code: 1D438002
Display: Same as code.
Used by:
Cause: The machine failed to pick up a part. The nozzle being used is to large for the part. The part
cannot be identified in the vision processing image.
Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller
nozzle for the part. Reduce the CCD level so that the part image becomes visible.
------------------------------
Code: 1D438100
Display: Same as code.
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. setting in the Part data.
------------------------------
Code: 1D438110
第 1753 页
Display: Same as code
Used by:
Cause: No value has been set for the "Lead_pitch" parameter in the Part data.
Remedy: Set a value for the "Lead_pitch" parameter.
------------------------------
Code: 1D438111
Display: Same as code
Used by:
Cause: No value has been set for the "Lead_width" parameter in the Part data.
Remedy: Set a value for the "Lead_width" parameter.
------------------------------
Code: 1D438112
Display: Same as code
Used by:
Cause: No value has been set for the "Lead_length_x" parameter (the length of leads in the X direction) in
the Part data.
Remedy: Set a value for the "Lead_length_x" parameter.
------------------------------
Code: 1D438113
Display: Same as code
Used by:
Cause: No value has been set for the "Lead_length_y" parameter (the length of leads in the Y direction) in
the Part data.
Remedy: Set a value for the "Lead_length_y" parameter.
------------------------------
Code: 1D438114
Display: Same as code
Used by:
Cause: No value has been set for the "Body_size 1" parameter (the body length in the X direction) in the
Part data.
Remedy: Set a value for the "Body_size 1" parameter.
------------------------------
Code: 1D438115
Display: Same as code
Used by:
Cause: No value has been set for the "Body_size 0" parameter (the body length in the X direction) in the
Part data.
Remedy: Set a value for the "Body_size 0" parameter.
------------------------------
Code: 1D438120
Display: Same as code
Used by:
Cause: No value has been set for the "Qty 0" parameter (the quantity of leads on the left side) in the Part
data.
Remedy: Set a value for the "Qty 0" parameter.
------------------------------
Code: 1D438121
Display: Same as code
Used by:
Cause: No value has been set for the "Qty 1" parameter (the quantity of leads on the lower side) in the
Part data.
第 1754 页