FUJI错误代码查询 - 第1845页

Cause: There was too much part pickup slippage (X direction). Remedy: Check how the parts are being supplied. ------------------------------ Code: 1D6ED080 Display: Used by: Cause: There was too much part pickup slippage…

100%1 / 5282
Cause: A lead could not be detected on the lower side of the part. The two final digits indicate the lead
number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EC2??
Display:
Used by:
Cause: A lead could not be detected on the right side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EC3??
Display:
Used by:
Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead
number.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EC4??
Display:
Used by:
Cause: The body's left edge could not be detected.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EC5??
Display:
Used by:
Cause: The body's lower edge could not be detected on the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EC6??
Display:
Used by:
Cause: The body's right edge could not be detected on the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EC7??
Display:
Used by:
Cause: The body's upper edge could not be detected on the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6ED000
Display:
Used by:
第 1844 页
Cause: There was too much part pickup slippage (X direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D6ED080
Display:
Used by:
Cause: There was too much part pickup slippage (Y direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D6EE???
Display:
Used by:
Cause: The image in vision processing is not correct so operation was canceled.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D6EF???
Display:
Used by:
Cause: There was a logical error in the management program.
Remedy: Check Part data.
------------------------------
Code: 1F020001
Display: 初始化错误
Used by: FKSP1
Cause: 执行所需要的DLL初始化失败。
Remedy: 1. 有可能未正确安装必要的DLL或者文件已损坏。请再次安装FKSP1 Communication service。
2. 机器应用程序有可能处于不稳定状态。请重新启动机器或者机器应用程序。
------------------------------
Code: 1F020002
Display: 系统错误
Used by: FKSP1
Cause: 创建通信线程失败。
Remedy: 1. 有可能未正确安装必要的DLL或者文件已损坏。请再次安装FKSP1 Communication service。
2. 机器应用程序的运行有可能处于不稳定状态。请重新启动机器或者机器应用程序。
------------------------------
Code: 1F020003
Display: 通信错误
Used by: FKSP1
Cause: 与FUJI通信协议服务的连接失败。
Remedy: FUJI通信协议服务有可能没有正确运行。
1.请确认FUJI通信协议服务是否正确运行。未启动时，请重新启动服务。即使重新启动也不能解决问题时，请再次安
装服务。
2. 请确认网络设定和状态。
3. 请确认是否在OS的防火墙等安全设定和安全软件中拦截了通信。
------------------------------
Code: 1F020004
Display: 通信错误
Used by: FKSP1
Cause: 与Fuji Flexa的Machine Communicate Service连接失败。
Remedy: Fuji Flexa的Machine Communicate Service有可能没有正确运行。
第 1845 页
1. 请确认Fuji Flexa的Machine Communicaete service是否正确运行。
2. 请确认网络设定和状态。
3. 请在安装了Machine Communicate Service的PC上确认是否在OS的防火墙等安全设定和安全软件中拦截了通信。
------------------------------
Code: 1F020005
Display: 通信错误
Used by: FKSP1
Cause: 不能向FUJI通信协议服务送信。
Remedy: FUJI通信协议服务有可能没有正确运行。 请进行确认。
1. 请重新启动FUJI通信协议服务。即使重新启动也不能解决问题时，请再次安装FKSP1 Communication service。
2. 请确认网络设定和状态。
3. 请确认是否在OS的防火墙等安全设定和安全软件中拦截了通信。
------------------------------
Code: 1F020006
Display: 通信错误
Used by: FKSP1
Cause: 发生与Fuji Flexa的Machine Communicate Service的通信错误。
Remedy: Fuji Flexa的Machine Communicate Service有可能没有正确运行。
1. 请确认Fuji Flexa的Machine Communicaete service是否正确运行。并确认在安装了Machine Communicate
Service的PC的OS设定和安全软件中是否拦截了通信。
2. 请确认网络设定和状态。
3. 请在安装了Machine Communicate Service的PC上确认是否在OS的防火墙等安全设定和安全软件中拦截了通信。
------------------------------
Code: 1F020007
Display: 系统错误
Used by: FKSP1
Cause: 在对操作系统的要求中发生错误。
Remedy: 操作系统的运行有可能处于不稳定状态。
1. 请重新启动操作系统再次执行操作。即使重新启动也不能解决问题时，请再次安装操作系统。
2. 请确认网络状态。
3. 请确认是否在OS的防火墙等安全设定和安全软件中拦截了通信。
------------------------------
Code: 1F020008
Display: 内部处理错误
Used by: FKSP1
Cause: 内部处理时发生错误。
Remedy: 有可能是FUJI通信协议服务存在问题。请重新启动服务。即使重新启动也不能解决问题时，请再次安装
FKSP1 Communication service。
------------------------------
Code: 1F020101
Display: 执行错误
Used by: FKSP1
Cause: 文件版本不整合。
Remedy: 有可能未正确安装必要的DLL或者文件已损坏。即使重新启动机器应用程序也不能解决问题时，请在卸载
FKSP1 Communication service后，再次安装。
------------------------------
Code: 1F020102
Display: 初始化错误
Used by: FKSP1
Cause: 执行所需要的DLL不足。
Remedy: 有可能未正确安装必要的DLL或者文件已损坏。即使重新启动机器应用程序也不能解决问题时，请再次安装
第 1846 页