FUJI错误代码查询 - 第1861页
Cause: There was a tolerance information data read error. Remedy: Check the Part data file. If the Part data file is correct, re-boot the system. ------------------------------ Code: 21002012 Display: Parts gd informatio…
Display: Parts side & appearance data read error
Used by:
Cause: There was a parts side and appearance data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 2100200A
Display: PD file offset table read error
Used by:
Cause: There was a Part data file offset table read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 2100200B
Display: This device no elements
Used by:
Cause: This device has no elements.
Remedy: Check the Part data clearance.
------------------------------
Code: 2100200C
Display: GD file create error
Used by:
Cause: There was a GD file create error.
Remedy: Check the Part data overwrite setting, and check the available memory on the hard disk.
------------------------------
Code: 2100200D
Display: GD file write error
Used by:
Cause: There was a GD file write error.
Remedy: Check the Part data overwrite setting, and check the available memory on the hard disk.
------------------------------
Code: 2100200E
Display: TOO large nozzle diameter
Used by:
Cause: The nozzle diameter is too large.
Remedy: Check the nozzle diameter settings in Part data.
------------------------------
Code: 2100200F
Display: GD file protect error
Used by:
Cause: The file created at the GD editor could not automatically create GDs. When creating GDs cancel
the write protect function at the GD editor.
Remedy: When creating GDs cancel the write protect function at the GD editor.
------------------------------
Code: 21002010
Display: Parts carry data read error
Used by:
Cause: There was a carrying data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002011
Display: Parts tolerance information data read error
Used by:
第 1860 页
Cause: There was a tolerance information data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002012
Display: Parts gd information data read error
Used by:
Cause: There was a GD information data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002013
Display: Parts Data read error
Used by:
Cause: Part data cannot be read because it is corrupted.
Remedy: Install the correct disk.
------------------------------
Code: 21002014
Display: Media full
Used by:
Cause: Same as the code.
Remedy: Install a disk which has enough space.
------------------------------
Code: 21002015
Display: Device not ready
Used by:
Cause: Same as the code.
Remedy: Install the correct disk.
------------------------------
Code: 21002016
Display: Bad type media
Used by:
Cause: Same as the code.
Remedy: Check the disk format.
------------------------------
Code: 21002017
Display: Not found
Used by:
Cause: Same as the code
Remedy: Install the correct disk and check the directory.
------------------------------
Code: 21002018
Display: Write protect
Used by:
Cause: Same as the code
Remedy: Release the write protection.
------------------------------
Code: 21002101
Display: Illigal parameter[s]
Used by:
Cause: The startup format was incorrect.
Remedy: Check the input command.
------------------------------
第 1861 页
Code: 21002102
Display: Filename is protected
Used by:
Cause: The filename is protected.
Remedy: Check the file.
------------------------------
Code: 21002103
Display: Filename is required
Used by:
Cause: The filename was not input.
Remedy: Input the filename.
------------------------------
Code: 21002104
Display: Discripter format error
Used by:
Cause: The descriptor format is incorrect.
Remedy: Re-install the descriptor.
------------------------------
Code: 21002105
Display: Cannot memory allocate
Used by:
Cause: Cannot allocate memory
Remedy: If something is being executed in the background, wait until this is finished. If not, re-boot
MCS.
------------------------------
Code: 21002106
Display: Gd file format error
Used by:
Cause: The GD file format is incorrect.
Remedy: Delete the file and re-create it.
------------------------------
Code: 21002107
Display: Discripter not found
Used by:
Cause: The descriptor was not found.
Remedy: Re-install the system.
------------------------------
Code: 21002108
Display: Message file not found
Used by:
Cause: The message file was not found.
Remedy: Re-install the system.
------------------------------
Code: 21002109
Display: Logical error
Used by:
Cause: There was a logical error.
Remedy: Re-boot MCS.
------------------------------
Code: 21002110
Display: I/O error
第 1862 页