FUJI错误代码查询 - 第187页

machine is operating in on_line mode. Remedy: None. ------------------------------ Code: 11060070 Display: Same as Code. Used by: QP132 Cause: The program is locked. The program cannot be deleted. Remedy: Delete the prog…

100%1 / 5282
Cause: There is no data change name while receiving dB.
Remedy: None.
------------------------------
Code: 1106003F
Display:
Used by:
Cause: The version number of the previous transmission is different from the current version number.
Remedy: Reset-start the machine.
------------------------------
Code: 11060040
Display: TVX11060040
Used by:
Cause: When one line was transmitted, the specified machine did not exist. Check the program at the
machine.
Remedy: Check the program at the machine.
------------------------------
Code: 11060041
Display: TVX11060041
Used by:
Cause: When one line was transmitted, the specified program was in automatic operation in foreground.
Remedy: Interrupt automatic operation and transmit the line again.
------------------------------
Code: 11060042
Display: TVX11060042
Used by:
Cause: When one line transmission is attempted, the line and the program sequence number differ.
Remedy: The number of sequences in the program have changed and the entire program must be
retransmitted.
------------------------------
Code: 11060043
Display: TVX11060043
Used by:
Cause: tV was transmitted before tQ.
Remedy: None.
------------------------------
Code: 11060061
Display: 11060061
Used by:
Cause: A remote block skip instruction is not possible during automatic operation.
Remedy: Exit automatic operation, then retransmit.
------------------------------
Code: 11060062
Display: 11060062
Used by:
Cause: A program does not exist in the foreground (number 0 position) on the machine.
Remedy: Transmit a program to the foreground (number 0 position) of the machine.
------------------------------
Code: 11060064
Display:
Used by:
Cause: When skip or data change is attempted, the operation cannot be attempted even though the
第 186 页
machine is operating in on_line mode.
Remedy: None.
------------------------------
Code: 11060070
Display: Same as Code.
Used by: QP132
Cause: The program is locked. The program cannot be deleted.
Remedy: Delete the program after automatic operation has been completed.
------------------------------
Code: 11060071
Display: Same as Code.
Used by: QP132
Cause: The program is locked. The program cannot be changed.
Remedy: Change the program after automatic operation has been completed.
------------------------------
Code: 11060090
Display:
Used by:
Cause: GD transmission was cancelled because of a cancellation request.
Remedy: None.
------------------------------
Code: 11060091
Display:
Used by:
Cause: A GV command was sent when the machine was not ready to receive a GV command.
Remedy: None.
------------------------------
Code: 11060092
Display:
Used by:
Cause: The element number exceeds the number of elements in the memory.
Remedy: None.
------------------------------
Code: 110600A0
Display:
Used by:
Cause: In pallet data transmission, an applicable program could not be found.
Remedy: None.
------------------------------
Code: 110600FF
Display:
Used by:
Cause: There is no MTU for the kO command.
Remedy: None.
------------------------------
Code: 1106012C
Display:
Used by:
Cause: The previous message remains at level 0 and a new message has been transmitted.
Remedy: None.
------------------------------
第 187 页
Code: 1106012D
Display:
Used by:
Cause: The previous message remains at level 1 and a new message has been transmitted.
Remedy: None.
------------------------------
Code: 1106012E
Display:
Used by:
Cause: The previous message remains at level 2 and a new message has been transmitted.
Remedy: None.
------------------------------
Code: 1106012F
Display:
Used by:
Cause: The message was transmitted to the wrong level.
Remedy: None.
------------------------------
Code: 110601F5
Display:
Used by:
Cause: PM was sent previously.
Remedy: None.
------------------------------
Code: 110601F6
Display:
Used by:
Cause: An incorrect ID was used for PI.
Remedy: None.
------------------------------
Code: 110601F7
Display:
Used by:
Cause: The previous free flag was erased at PI transmission.
Remedy: None.
------------------------------
Code: 110601FE
Display:
Used by:
Cause: The PM module cannot be transmitted because it is masked.
Remedy: None.
------------------------------
Code: 110601FF
Display:
Used by:
Cause: There is an error in PM "D".
Remedy: None.
------------------------------
Code: 11060200
Display: 11060200
Used by:
第 188 页