FUJI错误代码查询 - 第190页
Code: 11060406 Display: Used by: Cause: During partial transmission, device data was added. Remedy: Delete the program in the machine and retransmit that program. ------------------------------ Code: 11060407 Display: Us…
Cause: There is no free flag in __unit_admin.
Remedy: None.
------------------------------
Code: 11060230
Display:
Used by:
Cause: There was transmission outside bvc specifications.
Remedy: None.
------------------------------
Code: 11060231
Display:
Used by:
Cause: Block skip data was sent before bT.
Remedy: None.
------------------------------
Code: 11060232
Display:
Used by:
Cause: bVZ was received even though bVP was not received.
Remedy: None.
------------------------------
Code: 11060401
Display:
Used by:
Cause: During partial transmission, new element data was not sent.
Remedy: Delete the program in the machine and retransmit that program.
------------------------------
Code: 11060402
Display:
Used by:
Cause: During partial transmission, the element data size was different from the previous size.
Remedy: Delete the program in the machine and retransmit that program.
------------------------------
Code: 11060403
Display:
Used by:
Cause: Data was sent even though the element name has not been sent.
Remedy: None.
------------------------------
Code: 11060404
Display:
Used by:
Cause: Element data's processing table was damaged.
Remedy: Reset-start the machine.
------------------------------
Code: 11060405
Display:
Used by:
Cause: An unusable command was sent.
Remedy: Reset-start the machine.
------------------------------
第 189 页
Code: 11060406
Display:
Used by:
Cause: During partial transmission, device data was added.
Remedy: Delete the program in the machine and retransmit that program.
------------------------------
Code: 11060407
Display:
Used by:
Cause: During partial transmission, tray data was added.
Remedy: Delete the program in the machine and retransmit that program.
------------------------------
Code: 11060408
Display:
Used by:
Cause: Tray data was sent even though tray data is not registered.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 11060409
Display:
Used by:
Cause: Device data was sent even though device data is not registered.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 1106040A
Display:
Used by:
Cause: The number of elements in element data has exceeded the limit.
Remedy: None.
------------------------------
Code: 11060500
Display:
Used by:
Cause: A command to start data check was sent during data check.
Remedy: None.
------------------------------
Code: 11060501
Display:
Used by:
Cause: A checksum error occurred during data transmission.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 11060502
Display:
Used by:
Cause: A character number check error occurred during data transmission.
Remedy: Check the transmission cable. There is the possibility of ghost characters being sent.
------------------------------
Code: 11060600
Display:
Used by:
第 190 页
Cause:
Remedy:
------------------------------
Code: 11074100
Display:
Used by: IP2
Cause: The MTU [EMERGENCY STOP] button has been pressed.
Remedy: Cancel the MTU [EMERGENCY STOP] button.
------------------------------
Code: 11074110
Display:
Used by: IP2
Cause: A servo alarm has occurred.
Remedy: Check that the load on each servo axis is not too high.
------------------------------
Code: 11074120
Display:
Used by: IP2
Cause: A safety door is open.
Remedy: Close all safety doors.
------------------------------
Code: 11074130
Display:
Used by: IP2
Cause: A cycle alarm is occurring.
Remedy: A command to move was made, but the arrival check sensor did not turn on within the preset
time.
------------------------------
Code: 11074141
Display:
Used by: IP2
Cause: Overtravel X+ alarm.
Remedy: Move the overtravel sensor out of the overtravel position.
------------------------------
Code: 11074142
Display:
Used by: IP2
Cause: Overtravel X- alarm.
Remedy: Move the overtravel sensor out of the overtravel position.
------------------------------
Code: 11074143
Display:
Used by: IP2
Cause: Overtravel Y+ alarm.
Remedy: Move the overtravel sensor out of the overtravel position.
------------------------------
Code: 11074144
Display:
Used by: IP2
Cause: There is overtravel in the -Y axis.
Remedy: Operate the machine with the overtravel sensor removed.
第 191 页