FUJI错误代码查询 - 第1908页

Cause: The Ls task could not be started up. Remedy: Re-execute the function. If it still doesn't work, re-install the software. ------------------------------ Code: 21006406 Display: can't create Ls task pipe U…

100%1 / 5282
comment in question will be separated as a non-fixed feeder.
Remedy: Specify a feeder position within the feeder station's range.
------------------------------
Code: 210060A9
Display: "There is insufficient space for a feeder in PT file."
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred when the feeder width was checked against the end of the station. The feeder in question will be
separated as a non-fixed feeder.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 210060AA
Display: "Space between feeders in PT file is insufficient."
Used by:
Cause: An attempt was made to allocate the feeder in question as specified by the PST file, but an error
occurred due to interference between feeders.
Remedy: Change the PST specification number of the feeder in question.
------------------------------
Code: 21006400
Display: syntax error - illegal '+' option
Used by:
Cause: An illegal '+' option was specified at start-up.
Remedy: Check the specified option.
------------------------------
Code: 21006401
Display: can't read strings file
Used by:
Cause: The string file couldn't be loaded into the memory.
Remedy: Re-install the software.
------------------------------
Code: 21006402
Display: program file not found
Used by:
Cause: The specified production program name was not found.
Remedy: Check the production programs.
------------------------------
Code: 21006403
Display: change console path error
Used by:
Cause: During operation, the specified terminal path could not be changed.
Remedy: Re-boot MCS.
------------------------------
Code: 21006404
Display: CRT event link error
Used by:
Cause: The terminal event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 21006405
Display: can't fork Ls task
Used by:
第 1907 页
Cause: The Ls task could not be started up.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006406
Display: can't create Ls task pipe
Used by:
Cause: The Ls task pipe could not be created.
Remedy: Re-boot MCS.
------------------------------
Code: 21006407
Display: can't read Ls task pipe
Used by:
Cause: The Ls task pipe could not be read.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006408
Display: can't load program
Used by:
Cause: The specified production program couldn't be read.
Remedy: Check the file.
------------------------------
Code: 21006409
Display: can't load old permanent set table
Used by:
Cause: The specified permanent set table could not be read.
Remedy: Check the file.
------------------------------
Code: 2100640A
Display: can't get work memory
Used by:
Cause: The working memory could not be recalled.
Remedy: Re-boot MCS.
------------------------------
Code: 2100640B
Display: WARNING!! D_no.:PT data already exists
Used by:
Cause: The device number in the production program is the same as in the previous permanent set table.
Remedy: This is a warning. It is not an error message. It has no effect on processing. Check the device
numbers in the production program.
------------------------------
Code: 2100640C
Display: can't open program file
Used by:
Cause: The specified program file cannot be opened.
Remedy: Check the file.
------------------------------
Code: 2100640D
Display: can't read program file
Used by:
Cause: The specified program file cannot be read.
Remedy: Check the file.
第 1908 页
------------------------------
Code: 2100640E
Display: this file is not a program
Used by:
Cause: The specified file is not a production program.
Remedy: Check the production programs.
------------------------------
Code: 2100640F
Display: this file is not a PST
Used by:
Cause: The specified file is not a permanent set table.
Remedy: Check the file.
------------------------------
Code: 21006410
Display: can't open output PST file
Used by:
Cause: The output permanent set table cannot be opened.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006411
Display: can't create output PST file
Used by:
Cause: The output permanent set table cannot be created.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006412
Display: can't write output PST file
Used by:
Cause: The output permanent set table cannot be written.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006413
Display: WARNING!!****: Cartridge name isn't registered inpart data
Used by:
Cause: The feeder is not registered in part data.
Remedy: This message has no effect on processing. However, check the feeder settings in Part data.
------------------------------
Code: 21006414
Display: can't open part data file
Used by:
Cause: Part data file cannot be opened.
Remedy: Contact Fuji.
------------------------------
Code: 21006415
Display: can't read separator data file
Used by:
Cause: The separator data file cannot be read.
Remedy: Re-install the software.
第 1909 页