FUJI错误代码查询 - 第1913页
------------------------------ Code: 2100651C Display: offset_table read error Used by: Cause: Offset table read error. Remedy: Re-install the software. ------------------------------ Code: 2100651D Display: program_file…
Remedy: Check the special condition file.
------------------------------
Code: 21006513
Display: Part_data open error
Used by:
Cause: Part data open error.
Remedy: Check the Part data.
------------------------------
Code: 21006514
Display: Part_data read error
Used by:
Cause: Part data read error.
Remedy: Check the Part data.
------------------------------
Code: 21006516
Display: Device_data queue create error
Used by:
Cause: Device data queue create error.
Remedy: Check the device data.
------------------------------
Code: 21006517
Display: frame status 'OPEN' is nothing
Used by:
Cause: There was no empty slot for the device.
Remedy: This device cannot move to the specified machine.
------------------------------
Code: 21006518
Display: None separate machine
Used by:
Cause: Separation has been prohibited in the special conditions file.
Remedy: Check the file.
------------------------------
Code: 21006519
Display: Separate frame error
Used by:
Cause: Separate frame file error.
Remedy: Check that the contents of the source program device data and the contents of part data are the
same.
------------------------------
Code: 2100651A
Display: program_file read error
Used by:
Cause: Production program read error.
Remedy: Check the production program.
------------------------------
Code: 2100651B
Display: program_file write error
Used by:
Cause: Production program write error.
Remedy: Check that the write protect setting is not on. If it is not on, check the available memory on the
hard disk.
第 1912 页
------------------------------
Code: 2100651C
Display: offset_table read error
Used by:
Cause: Offset table read error.
Remedy: Re-install the software.
------------------------------
Code: 2100651D
Display: program_file open error
Used by:
Cause: Production program open error.
Remedy: Check the production program.
------------------------------
Code: 2100651E
Display: program_file read error
Used by:
Cause: Production program read error.
Remedy: Check the production program.
------------------------------
Code: 2100651F
Display: program_file write error
Used by:
Cause: Production program write error.
Remedy: Check that the write protect setting is not on.
------------------------------
Code: 21006520
Display: defferent data 'd_comment' and 'part name'
Used by:
Cause: The destination machine had these settings, and there is a difference in the d_comments and the
Part data between the base machine and the destination machine.
Remedy: This is a warning. Production will continue.
------------------------------
Code: 21006521
Display: defferent data 'd_comment'
Used by:
Cause: When the next machine had these settings, there is a difference in the d_comments between the
base machine and the destination machine.
Remedy: This is a warning. Production will continue.
------------------------------
Code: 21006522
Display: defferent data 'part name'
Used by:
Cause: When the next machine had these settings, there is a difference in the part name between the
base machine and the destination machine.
Remedy: This is a warning. Production will continue.
------------------------------
Code: 21006523
Display: frame status FIX 'base' and 'distination'
Used by:
Cause: The base move and the destination move's frame status is different.
Remedy: Check the settings of the permanent set and special variables files.
第 1913 页
------------------------------
Code: 21006524
Display: frame status FIX 'base'
Used by:
Cause: The base frame status is a fixed device.
Remedy: Check the settings of the permanent set and special variables files.
------------------------------
Code: 21006525
Display: frame status FIX 'destination'
Used by:
Cause: The destination frame status is a fixed device.
Remedy: Check the settings of the permanent set and special variables files.
------------------------------
Code: 21006526
Display: No separation machine
Used by:
Cause: There is no machine to separate to.
Remedy: Check the structure of the line and the source program.
------------------------------
Code: 21006527
Display: M/C not defined in Sep_data block of Parta Data
Used by:
Cause: The next machine is not registered in Part data.
Remedy: Check Sep_data in Part data.
------------------------------
Code: 21006528
Display: Mark sequence is nothing
Used by:
Cause: Either the base or the destination machine has no mark sequence.
Remedy: Check the source program.
------------------------------
Code: 21006529
Display: different block#, position in mark sequence
Used by:
Cause: The mark sequence block number is not the same as the coordinate specification.
Remedy: Check the source program.
------------------------------
Code: 2100652A
Display: different block# in mark sequence
Used by:
Cause: The mark sequence is in a different block.
Remedy: Check the source program.
------------------------------
Code: 2100652B
Display: different position in mark sequence
Used by:
Cause: The mark sequence coordinate position is wrong.
Remedy: Check the source program.
------------------------------
Code: 2100652C
Display: distination frame status is CLOSE
第 1914 页