FUJI错误代码查询 - 第1928页
Remedy: Check the file. ------------------------------ Code: 21007119 Display: Nc file not found Used by: Cause: Unable to find the system (Nc) file. Remedy: Re-install the software. ------------------------------ Code: …
Display: Strategy file get error
Used by:
Cause: Unable to read the strategy file.
Remedy: Re-install the software.
------------------------------
Code: 21007111
Display: Make not mark sequence
Used by:
Cause: Mark sequences were not created.
Remedy: This message occurs when there are no command sequences in the program.
------------------------------
Code: 21007112
Display: Prod file not write
Used by:
Cause: Nothing was written to the output file.
Remedy: Check that the write protect function is not on.
------------------------------
Code: 21007113
Display: Source file not found
Used by:
Cause: Unable to find source file.
Remedy: Check the filename.
------------------------------
Code: 21007114
Display: Source file open error
Used by:
Cause: Unable to open the source file.
Remedy: Check the file.
------------------------------
Code: 21007115
Display: Output file open error
Used by:
Cause: Unable to open the output file.
Remedy: If the output filename exists previously, check the condition of the file.
------------------------------
Code: 21007116
Display: Environment file not found
Used by:
Cause: The GL environment file was not found.
Remedy: Create the file, or re-install the software.
------------------------------
Code: 21007117
Display: Environment file open err
Used by:
Cause: Unable to open the GL environment file.
Remedy: Check the file.
------------------------------
Code: 21007118
Display: Environment file read err
Used by:
Cause: Unable to read the GL environment file.
第 1927 页
Remedy: Check the file.
------------------------------
Code: 21007119
Display: Nc file not found
Used by:
Cause: Unable to find the system (Nc) file.
Remedy: Re-install the software.
------------------------------
Code: 2100711A
Display: Nc file open error
Used by:
Cause: Unable to open the system (Nc) file.
Remedy: Re-install the software.
------------------------------
Code: 2100711B
Display: Nc file read error
Used by:
Cause: Unable to read the system (Nc) file.
Remedy: Re-install the software.
------------------------------
Code: 2100711C
Display: File read error
Used by:
Cause: Unable to read the input file.
Remedy: Check the file.
------------------------------
Code: 2100711D
Display: Program machine type unmatched
Used by:
Cause: The machine type in the production program is incorrect.
Remedy: Check the file.
------------------------------
Code: 2100711E
Display: Make not block skip sequence
Used by:
Cause: Block skip sequences were not created.
Remedy: This message occurs whenever there is a program without block skip sequences.
------------------------------
Code: 2100711F
Display: Make not dummy glue sequence
Used by:
Cause: Trial dot sequences were not created.
Remedy: This message occurs whenever there is a program without trial dot sequences.
------------------------------
Code: 21007120
Display: Make not glue check sequence
Used by:
Cause: Glue check sequences were not created.
Remedy: This message occurs whenever there is a program without glue check sequences.
------------------------------
Code: 21007121
第 1928 页
Display: Make not apply sequence
Used by:
Cause: Application sequences were not created.
Remedy: This message occurs whenever there is a program without application sequences.
------------------------------
Code: 21007122
Display: Input & output filename duplecate
Used by:
Cause: The name of the input file and the output file are the same.
Remedy: Change the filenames.
------------------------------
Code: 21007123
Display: Output file already exist
Used by:
Cause: The output file already exists.
Remedy: Change the filename or overwrite the old file.
------------------------------
Code: 21007124
Display: New prodction file has no sequence data
Used by:
Cause: The new production program has no sequence data.
Remedy: Check the program sequence data.
------------------------------
Code: 21007125
Display: Input program file name is too long
Used by:
Cause: The input filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007126
Display: Output program file name is too long
Used by:
Cause: The output program filename is too long.
Remedy: Check the filename.
------------------------------
Code: 21007400
Display: Illegal Parameter option
Used by:
Cause: The specified option is illegal.
Remedy: If doing a direct start-up, check the start-up option.
------------------------------
Code: 21007401
Display: Illegal parameter
Used by:
Cause: The startup parameter is illegal.
Remedy: If doing a direct start-up, check the start-up parameters.
------------------------------
Code: 21007402
Display: Pt file read error
Used by:
Cause: The permanent set table cannot be read.
第 1929 页