FUJI错误代码查询 - 第2192页

supported in the future or it is no longer supported. ------------------------------ Code: 51??0095 Display: Command process could not be started. Used by: Cause: The command process in the C/C could not be started. Reme…

100%1 / 5282
Display: Nickname specified as filename in flush command.
Used by:
Cause: A name the same as the nickname cannot be set in the output file specified by the flush
command.
Remedy: Specify a name other than the nickname for the output file name.
------------------------------
Code: 51??0083
Display: The production data log is being acquired.
Used by:
Cause: The production data log for the target machine is presently being acquired.
Remedy: Use the fi finish command to stop acquisition of the production data log.
------------------------------
Code: 51??0084
Display: The sampled event is not defined.
Used by:
Cause: The sampled event is not recorded in the C/C setting data.
Remedy: None of the items EVENT,REMARK or HLP is recorded in the C/C setting data,therefore the
production data is not sampled.Record the production data which you want to sample in the C/C setting
data.
------------------------------
Code: 51??0090
Display: Error ending machine.
Used by:
Cause: When a single command was executed for a number of machines, a machine which had made an
error stop was discovered. Result codes for each of the machines are reported to the supplementary
information.
Remedy:
------------------------------
Code: 51??0091
Display: Command canceled by operator.
Used by:
Cause: Execution of the command was canceled by the operator.
Remedy:
------------------------------
Code: 51??0092
Display: Non-interruptable command.
Used by:
Cause: The specified job is a command which cannot be interrupted.
Remedy:
------------------------------
Code: 51??0093
Display: Command in interrupt-prohibit status.
Used by:
Cause: Interruption of the specified job is presently prohibited.
Remedy:
------------------------------
Code: 51??0094
Display: Command not supported in present version.
Used by:
Cause: The specified command is not supported in the present C/C.
Remedy: The specified command cannot be used in the present C/C. The command will either be
第 2191 页
supported in the future or it is no longer supported.
------------------------------
Code: 51??0095
Display: Command process could not be started.
Used by:
Cause: The command process in the C/C could not be started.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0096
Display: Scheduling failure.
Used by:
Cause: A scheduling failure occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0097
Display: File acquisition failure.
Used by:
Cause: A file acquisition failure occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0098
Display: Memory acquisition failure.
Used by:
Cause: A memory acquisition failure occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0099
Display: Other.
Used by:
Cause: A fatal error occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0101
Display: The C/C has not been started.
Used by:
Cause: As above.
Remedy: Start the C/C.
------------------------------
Code: 51??0102
Display: The C/C is down.
Used by:
Cause: The C/C stopped operating for one of the following reasons.Ctrl-C was input at the C/C start
window.The C/C start window was closed.The C/C start user logged off.The C/C start machine was shut
down.
Remedy: Start the C/C.
------------------------------
Code: 51??1000
Display: No "UNIT", "PROGRAM" or "UNIT", "PROGRAM" is not at the correct position.
Used by:
Cause: "UNIT", "PROGRAM" was not found in the specified production program or "UNIT", "PROGRAM"
does not follow the correct unit.
第 2192 页
Remedy: Check the production program "UNIT", "PROGRAM" settings. Furthermore, check the setting for
the "UNIT" line prior to "UNIT", "PROGRAM".
------------------------------
Code: 51??1001
Display: No "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: "BLOCK", "HEADER-" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the production
program.
------------------------------
Code: 51??1002
Display: No "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-".
Used by:
Cause: "BLOCK", "PGHEAD-" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production
program.
------------------------------
Code: 51??1003
Display: No "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+".
Used by:
Cause: "BLOCK", "SEQUENCE+" was not found in "UNIT", "PROGRAM" in the specified production
program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program.
------------------------------
Code: 51??1004
Display: No "UNIT", "PROGRAM" - "BLOCK", "DEVICE+".
Used by:
Cause: "BLOCK", "DEVICE+" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
program.
------------------------------
Code: 51??1005
Display: "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" is multiply defined.
Used by:
Cause: The "BLOCK", "PGHEAD-" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production
program.
------------------------------
Code: 51??1006
Display: "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" is multiply defined.
Used by:
Cause: The "BLOCK", "SEQUENCE+" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program.
------------------------------
Code: 51??1007
Display: "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" is multiply defined.
Used by:
第 2193 页