FUJI错误代码查询 - 第2193页

Remedy: Check the production program "UNIT", "PROGRAM" settings. Furthermore, check the setting for the "UNIT" line prior to "UNIT", "PROGRAM". --------------------------…

100%1 / 5282
supported in the future or it is no longer supported.
------------------------------
Code: 51??0095
Display: Command process could not be started.
Used by:
Cause: The command process in the C/C could not be started.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0096
Display: Scheduling failure.
Used by:
Cause: A scheduling failure occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0097
Display: File acquisition failure.
Used by:
Cause: A file acquisition failure occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0098
Display: Memory acquisition failure.
Used by:
Cause: A memory acquisition failure occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0099
Display: Other.
Used by:
Cause: A fatal error occurred in the C/C.
Remedy: Report the details of this problem to Fuji.
------------------------------
Code: 51??0101
Display: The C/C has not been started.
Used by:
Cause: As above.
Remedy: Start the C/C.
------------------------------
Code: 51??0102
Display: The C/C is down.
Used by:
Cause: The C/C stopped operating for one of the following reasons.Ctrl-C was input at the C/C start
window.The C/C start window was closed.The C/C start user logged off.The C/C start machine was shut
down.
Remedy: Start the C/C.
------------------------------
Code: 51??1000
Display: No "UNIT", "PROGRAM" or "UNIT", "PROGRAM" is not at the correct position.
Used by:
Cause: "UNIT", "PROGRAM" was not found in the specified production program or "UNIT", "PROGRAM"
does not follow the correct unit.
第 2192 页
Remedy: Check the production program "UNIT", "PROGRAM" settings. Furthermore, check the setting for
the "UNIT" line prior to "UNIT", "PROGRAM".
------------------------------
Code: 51??1001
Display: No "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: "BLOCK", "HEADER-" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the production
program.
------------------------------
Code: 51??1002
Display: No "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-".
Used by:
Cause: "BLOCK", "PGHEAD-" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production
program.
------------------------------
Code: 51??1003
Display: No "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+".
Used by:
Cause: "BLOCK", "SEQUENCE+" was not found in "UNIT", "PROGRAM" in the specified production
program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program.
------------------------------
Code: 51??1004
Display: No "UNIT", "PROGRAM" - "BLOCK", "DEVICE+".
Used by:
Cause: "BLOCK", "DEVICE+" was not found in "UNIT", "PROGRAM" in the specified production program.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
program.
------------------------------
Code: 51??1005
Display: "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" is multiply defined.
Used by:
Cause: The "BLOCK", "PGHEAD-" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "PGHEAD-" in the production
program.
------------------------------
Code: 51??1006
Display: "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" is multiply defined.
Used by:
Cause: The "BLOCK", "SEQUENCE+" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program.
------------------------------
Code: 51??1007
Display: "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" is multiply defined.
Used by:
第 2193 页
Cause: The "BLOCK", "DEVICE+" line in "UNIT", "PROGRAM" in the specified production program is
multiply defined.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
program.
------------------------------
Code: 51??1008
Display: No "UNIT", "PROGRAM" - "BLOCK", "IMAGE-".
Used by:
Cause: "BLOCK", "IMAGE-" was not found in "UNIT", "PROGRAM" in the specified transmission image
type production program. Alternatively, "BLOCK", "RDCCIMG-" was not found in "UNIT", "PROGRAM" in
the transmission image type partial data.
Remedy: Check the setting made for "UNIT", "PROGRAM" - "BLOCK", "IMAGE-" in the production
program. Alternatively, check the setting made for "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-" in the
partial data or "FILESTRUCT" in "UNIT", "STRUCT".
------------------------------
Code: 51??1009
Display: No vQN line in "UNIT", "PROGRAM" - "BLOCK", "IMAGE-".
Used by:
Cause: The vQN line was not found in "BLOCK", "IMAGE-" in "UNIT", "PROGRAM" in the specified
transmission image type production program. Alternatively, the vQN line was not found in "BLOCK",
"RDCCIMG-" in "UNIT", "PROGRAM" in the transmission image type partial data.
Remedy: Check the content of "UNIT", "PROGRAM" - "BLOCK", "IMAGE-" in the production program.
Alternatively, check the content of "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-" in the partial data.
------------------------------
Code: 51??1010
Display: No dQ line in "UNIT", "PROGRAM" - "BLOCK", "IMAGE-".
Used by:
Cause: The dQ line was not found in "BLOCK", "IMAGE-" in "UNIT", "PROGRAM" in the specified
transmission image-type production program.
Remedy: Check the content of "UNIT", "PROGRAM" - "BLOCK", "IMAGE-" in the production program.
------------------------------
Code: 51??1011
Display: No tQ line in "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-".
Used by:
Cause: The tQ line was not found in "BLOCK", "RDCCIMG-" in "UNIT", "PROGRAM" in the specified
transmission image-type partial data.
Remedy: Check the content of "UNIT", "PROGRAM" - "BLOCK", "RDCCIMG-" in the partial data.
------------------------------
Code: 51??1012
Display: "UNIT", "PROGRAM" - "BLOCK", "HEADER-" format error.
Used by:
Cause: A format error was detected in "BLOCK", "HEADER-" when "UNIT", "PROGRAM" in the specified
production program was read.
Remedy: Check the setting for "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the production program.
------------------------------
Code: 51??1013
Display: Format error in "MCTYPE" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-".
Used by:
Cause: A format error was detected in "MCTYPE" in "BLOCK", "HEADER-" when "UNIT", "PROGRAM" in
the specified production program was read.
Remedy: Check the setting for "MCTYPE" in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
第 2194 页