FUJI错误代码查询 - 第517页

Display: 大型不良元件排出盒已满。 Used by: XP242 Cause: 大型不良元件排出盒已满。 Remedy: 请将大型不良元件排出盒里的元件全部拿掉。 ------------------------------ Code: 12050441 Display: 中型不良元件排出盒已满。 Used by: XP242 Cause: 中型不良元件排出盒已满。 Remedy: 请将中型不良元件排出盒里的元件全部拿掉。 --…

100%1 / 5282
Stage2: X09D D2 PALLET SET CHECK FRONT
X09E D2 PALLET SET CHECK REAR
Check if there is any foreign matter underneath the pallet, or if the pallet is tilted.
------------------------------
Code: 1205042F
Display: Tool memory error
Used by: QP3OF
Cause: An unspecified tool exists on the holder.
Remedy: Remove the tool from the holder, or access the tool settings screen at the touch panel to specify
the tool that is attached to the holder.
------------------------------
Code: 12050430
Display: Tool memory error
Used by: QP3OF
Cause: The tool specified at the tool allocation screen is not attached to the holder.
Remedy: Attach the specified tool to the head, or remove the tool setting by opening the tool setttings
screen at the touch panel and changing the tool number to '0'.
------------------------------
Code: 12050431
Display: Tool memory error
Used by: QP3OF
Cause: An unspecified tool exists in a changer socket.
Remedy: Remove the tool if it is attached to the holder as there is the possibility of interference. If a tool
is not attached to the holder, firstly attach a tool to the holder, then open the tool settings screen at the
touch panel and set the holder tool number to '0'.
------------------------------
Code: 12050432
Display: Tool memory error
Used by: QP3OF
Cause: The tool specified at the tool allocation screen is not in the changer socket.
Remedy: Insert the specified tool into the socket, or remove the tool nickname setting at the toolsetttings
screen by changing the tool nickname for the socket to 'Empty'.
------------------------------
Code: 12050433
Display: Tool interference error
Used by: QP3OF
Cause: When performing tool ejection, there is a possibility of interference with another tool.
Remedy: At the touch panel, open the tool settings screen and specify a new position for the tool(s) so that
interference will not occur. Check that the tool nicknames are correct. If all tools are already in a safe
position when this error occurs, check that the tool changer nickname is correct.
------------------------------
Code: 12050434
Display: Tool interference error
Used by: QP3OF
Cause: When performing tool ejection, there is a possibility of interference with the parts camera lighting
unit.
Remedy: At the touch panel, open the tool settings screen and specify a new position for the tool(s) so that
interference will not occur. Check that the tool nicknames are correct. If all tools are already in a safe
position when this error occurs, check that the tool changer nickname is correct.
------------------------------
Code: 12050440
第 516 页
Display: 大型不良元件排出盒已满。
Used by: XP242
Cause: 大型不良元件排出盒已满。
Remedy: 请将大型不良元件排出盒里的元件全部拿掉。
------------------------------
Code: 12050441
Display: 中型不良元件排出盒已满。
Used by: XP242
Cause: 中型不良元件排出盒已满。
Remedy: 请将中型不良元件排出盒里的元件全部拿掉。
------------------------------
Code: 12050442
Display: 送出动作中大型不良元件排出盒脱离。
Used by: XP242
Cause: 在排出动作中大型不良元件排出盒脱离。
Remedy: 请将大型不良元件排出盒装入机器内 。
------------------------------
Code: 12050443
Display: 因大型不良元件排出盒脱离而不能排出不良元件。
Used by: XP242
Cause: 因大型不良元件排出盒脱离而不能排出不良元件。
Remedy: 请将大型不良元件排出盒装入机器内。
------------------------------
Code: 12050444
Display: 大型不良元件排出盒脱离。
Used by: XP242
Cause: 大型不良元件排出盒脱离。
Remedy: 请将大型不良元件排出盒装入机器内。
------------------------------
Code: 12050445
Display: 不能取入影像。
Used by: XP242
Cause: 不能取入影像。
Remedy: 这种错误频繁发生时，有必要更换伺服电路板、影像处理电路板。
------------------------------
Code: 12050446
Display: Wait Ready On
Used by: GPX,NXTP
Cause: 动力源OFF着。
Remedy: 请按下Ready On 开关。
动力源打开。
<img src="$LKEY_ERRIMG_MC$/12050446.PNG">
------------------------------
Code: 12050447
Display: 不能检测出存储吸嘴。请确认是否有折断了的吸嘴存在。
Used by: XP143
Cause: 不能检测出存储吸嘴。
Remedy: 如果在吸嘴存储器内存在有折断了的吸嘴时请除去。
------------------------------
Code: 12050450
Display: 温控泄水槽水满异常
第 517 页
Used by: NXTP
Cause: 水满检测传感器感应到泄水槽内的积水已满。
Remedy: 请关闭电源后排除泄水槽排水不通畅的问题。
<img src="$LKEY_ERRIMG_MC$/12050450.PNG">
------------------------------
Code: 12050451
Display: 温控温度保险丝烧断
Used by: NXTP
Cause: 放热散热片的温度保险丝因加热异常而烧断。
Remedy: 请关闭机器电源。请确认放热散热片温度过高的原因（过滤器堵塞、风扇故障等）。请更换保险丝。每个散
热片都配有一个保险丝。（请联系售后服务人员）
<img src="$LKEY_ERRIMG_MC$/12050451.PNG">
------------------------------
Code: 12050452
Display: 温控电源异常
Used by: NXTP
Cause: 温控单元的开关式电源出现输出异常。
Remedy: 可能是电源出了故障或者线路连接有问题。请确认电源以及线路。（请联系售后服务人员）
<img src="$LKEY_ERRIMG_MC$/12050452.PNG">
------------------------------
Code: 12050453
Display: 温度传感器异常
Used by: NXTP
Cause: 温度传感器出现了断线、短路。
Remedy: 请确认温度传感器的连线是否有问题。（请联系售后服务人员）
<img src="$LKEY_ERRIMG_MC$/12050453.PNG">
------------------------------
Code: 12050501
Display: Mark read error!(QP301)
Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643,GSP5,IP3,QP301
Cause: The mark could not be found. The mark size is incorrect, the mark is missing, the bright setting
is not correctly set or some related problem.
Failed to detect the mark.(QP301)
Remedy: Check that the mark size has been input correctly. Check that the bright setting is set properly.
If it is not, reset this using the [VISION], [BRIGHT] and [MARK] commands. Generally, if the mark can be
seen on the monitor, this adjustment is not necessary.
Check the mark size and the FOL carrier supply direction.(QP301)
------------------------------
Code: 12050502
Display: "Check D**"
Used by: IP3
Cause: The maximum number of vision processing recoveries have been performed for a reason other
than component pickup failure.
Remedy: Make sure that the correct component is being picked up. Inspect the tape feeder, and check
the Part data.
------------------------------
Code: 12050503
Display: 影像处理超时
Used by: GPX-C
Cause: 影像处理超时。
Remedy: 有可能是影像信号线出现了接触不良、断线等现象。请先确认影像信号线，然后再重启机器。如果按上述方
第 518 页