FUJI错误代码查询 - 第525页

------------------------------ Code: 1205202A Display: Used by: Cause: The axis moved beyond its limit. Remedy: Check the coordinates in the program and the values in Proper data. ------------------------------ Code: 120…

100%1 / 5282
Used by: IP3,QP132
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052022
Display:
Used by: IP3,QP132
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052023
Display:
Used by: IP3,QP132
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052024
Display:
Used by: IP3
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052025
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052026
Display:
Used by: IP3
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052027
Display:
Used by: IP3
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052028
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052029
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
第 524 页
------------------------------
Code: 1205202A
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 1205202B
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 1205202C
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 1205202D
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 1205202F
Display:
Used by:
Cause: The axis moved beyond its limit.
Remedy: Check the coordinates in the program and the values in Proper data.
------------------------------
Code: 12052030
Display:
Used by: GSP5
Cause: An MX axis cycle stop has occurred. The servo axis could not reach its tarte in the specified time.
Something interfered with the movement of the axis.
Remedy: Check the load on the servo axis.Check the motor, servo amp connectors and wiring. Remove
any obstacles to movement.
------------------------------
Code: 12052031
Display:
Used by: GSP5
Cause: An MYL axis cycle stop has occurred. The servo axis could not reach its tarte in the specified
time.Something interfered with the movement of the axis.
Remedy: Check the load on the servo axis.Check the motor, servo amp connectors and wiring. Remove
any obstacles to movement.
------------------------------
Code: 12052032
Display:
Used by: GSP5
Cause: An MYR axis cycle stop has occurred. The servo axis could not reach its tarte in the specified
第 525 页
time.Something interfered with the movement of the axis.
Remedy: Check the load on the servo axis.Check the motor, servo amp connectors and wiring. Remove
any obstacles to movement.
------------------------------
Code: 12052033
Display: Cycle Alarm SERVO SS
Used by: QP132
Cause: An SS servo axis cycle alarm has occurred. The servo axis did not reach the intended value within
the scheduled amount of time. Or there was something causing interference with the axis.
Remedy: Make sure that the servo is not overloaded. Check the connectors and wiring of the motor and
servo amp. Inspect the servo amp. Remove any objects that may be interfering with the axis.
------------------------------
Code: 12052034
Display: Cycle Alarm SERVO MX
Used by: QP132
Cause: An MX servo axis cycle alarm has occurred. The servo axis did not reach the intended value
within the scheduled amount of time. Or there was something causing interference with the axis.
Remedy: Make sure that the servo is not overloaded. Check the connectors and wiring of the motor and
servo amp. Inspect the servo amp. Remove any objects that may be interfering with the axis.
------------------------------
Code: 12052035
Display: Cycle Alarm SERVO MY
Used by: QP132
Cause: An MY servo axis cycle alarm has occurred. The servo axis did not reach the intended value
within the scheduled amount of time. Or there was something causing interference with the axis.
Remedy: Make sure that the servo is not overloaded. Check the connectors and wiring of the motor and
servo amp. Inspect the servo amp. Remove any objects that may be interfering with the axis.
------------------------------
Code: 12052036
Display: Cycle Alarm SERVO PI
Used by: QP132
Cause: A PI servo axis cycle alarm has occurred.The servo axis did not reach the intended value within
the scheduled amount of time. Or there was something causing interference with the axis.
Remedy: Make sure that the servo is not overloaded. Check the connectors and wiring of the motor and
servo amp. Inspect the servo amp. Remove any objects that may be interfering with the axis.
------------------------------
Code: 12052037
Display: Cycle Alarm SERVO PO
Used by: QP132
Cause: A PO servo axis cycle alarm has occurred.The servo axis did not reach the intended value within
the scheduled amount of time. Or there was something causing interference with the axis.
Remedy: Make sure that the servo is not overloaded. Check the connectors and wiring of the motor and
servo amp. Inspect the servo amp. Remove any objects that may be interfering with the axis.
------------------------------
Code: 12052038
Display: Cycle Alarm SERVO F
Used by:
Cause: An F servo axis cycle alarm has occurred.The servo axis did not reach the intended value within
the scheduled amount of time. Or there was something causing interference with the axis.
Remedy: Make sure that the servo is not overloaded. Check the connectors and wiring of the motor and
servo amp. Inspect the servo amp. Remove any objects that may be interfering with the axis.
第 526 页