FUJI错误代码查询 - 第596页
------------------------------ Code: 12056175 Display: Used by: Cause: Remedy: ------------------------------ Code: 12056176 Display: Used by: Cause: Remedy: ------------------------------ Code: 12056177 Display: Used by…
Remedy: 请解除联锁输入。
<img src="$LKEY_ERRIMG_MC$/1205616D.PNG">
------------------------------
Code: 1205616E
Display: 搬运轨道宽度切换时虽然进行了微调整动作，但是，没有调整到公差范围内。
Used by: NXTP
Cause: 虽然进行了搬运轨道宽度切换，但是，存在指定宽度±0.1mm以上的偏差。
Remedy: １．请确认主搬运轨道从属导轨附近是否存在干涉物。
２．请进行主搬运轨道导轨的确认、加油。
３．请再次进行换线。
<img src="$LKEY_ERRIMG_MC$/1205616E.PNG">
------------------------------
Code: 1205616F
Display: 联锁 外部输入
Used by: NXTP
Cause: 因为进行了联锁输入的选项输入检测，不能启动指令。
Remedy: 请解除联锁输入。
------------------------------
Code: 12056170
Display: 联锁 （MX｜MYR｜MYL）轴 电路板通过确认[Interlock （MX｜MYR｜MYL）axis]
Used by: GPX-C
Cause: 在移动所显示的轴时，IN-MAIN搬运轨道的电路板换乘确认传感器或MAIN-OUT搬运轨道的电路板换乘确认
传感器因为确认了电路板，所以不能够移动平台。
Remedy: 请从搬运轨道上除去电路板。
<img src="$LKEY_ERRIMG_MC$/12056170.PNG">
------------------------------
Code: 12056171
Display: 联锁 主搬运轨电路板通过确认
Used by: GPX-C
Cause: 虽然搬运轨未处于搬运状态，但是转移感应传感器感应到了电路板。
Remedy: 1.请确认电路板是否掉落在机器内。2.如果转移感应传感器上有电路板，则请将其清除。
------------------------------
Code: 12056172
Display: 操作平台与搬运轨道的联锁异常
Used by: GPX-C
Cause: 搬运轨道落坐传感器测出搬运轨道浮起。有可能是操作平台与搬运轨道之间夹杂了异物。
Remedy: 请用手抬起操作平台取出异物。或再次确认搬运轨道落坐传感器、浮起检测传感器的ON/OFF动作是否正确
。
<img src="$LKEY_ERRIMG_MC$/12056172.png">
------------------------------
Code: 12056173
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12056174
Display:
Used by:
Cause:
Remedy:
第 595 页
------------------------------
Code: 12056175
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12056176
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12056177
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12056178
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12056179
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1205617A
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1205617B
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1205617C
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 12057001
Display: Regular placing pressure control alarm
第 596 页
Used by: QP3
Cause: Deviation (3σ) exceeded 20[gf]. Specified pressure could not be reproduced.
Remedy: Carry out regular placing pressure zero adjustment again.
------------------------------
Code: 12060313
Display:
Used by:
Cause: There is a screen in the backside cleaning position so the collect command cannot be executed.
Remedy: Remove the screen from the backside position and execute the collect command.
------------------------------
Code: 12061001
Display: CHECK HANDLE
Used by: CP3,CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: The handle which turns the cam axis is not in its rest position.
Remedy: Return the handle to its original position.
------------------------------
Code: 12061002
Display: CHECK NOZZLE
Used by: CP3,CP4-1,CP4-2,CP4-3
Cause: The nozzle at station 9 is lowered (CP).
Remedy: Return the nozzle to its original position.
------------------------------
Code: 12061003
Display: CHECK 5ST NZL
Used by: CP3
Cause: The nozzle orientation was not returned to 0 deg at station 12 so the machine stopped when it
reached station 5 (CP).
Remedy: Adjust the rotating mechanisms at stations 5 and 12. If the nozzle was rotated during nozzle
change, cut the power and move the nozzle back to 0 deg. by hand.
------------------------------
Code: 12061004
Display: D ORG POS NG
Used by: CP3,CP4-1,CP4-2
Cause: The table is not at the resupply position (CP).
Remedy: Return the table to the resupply position.
------------------------------
Code: 12061005
Display: NOZZLE SKIP1 OVER
Used by: CP3,CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643
Cause: There are too many nozzles skipping (CP).
Remedy: Check the nozzles that are skipping.
------------------------------
Code: 12061007
Display: MAX Dno ERROR
Used by:
Cause: The specified device number is too large (CP).
Remedy: Operate in joint mode.
------------------------------
Code: 12061008
Display: VF Probe Er
Used by: CP3
第 597 页