FUJI错误代码查询 - 第750页

------------------------------ Code: 12070?C2 Display: "ICM(PMC?,SCU?) Error Code:********" (QP2) "No Specified Device D Exist" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,…

100%1 / 5282
"Nzl Name Not Found in Prop" (QP2)
Used by: QP242
Cause: The nozzle name in question could not be found in the Proper data.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Check how the nozzle name is specified in the Part data, and register the same nozzle in the
Proper data.
------------------------------
Code: 12070?BB
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Nzl Size Not Found in Prop" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242
Cause: The nozzle in question could not be found in the Proper data.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the nozzle size specified in the Part data, and register a matching nozzle in the Proper
data.
------------------------------
Code: 12070?BF
Display: PM?? ERROR Code: ******** (QP132)
"Device check status error Device Check not complete."(QP132)
Used by: QP132
Cause: The status of a part (s) is not correct.
Automatic operation cannot be started because the status of one or some of the parts necessary for this
production program is not "OK".
("PM??" indicates the module number (QP-132).)
("********" indicates the error code.)
Remedy: Re-execute automatic operation after using the device check to change the status of the part(s)
to "OK".
------------------------------
Code: 12070?C0
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Sequence Data" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: There was an error in the sequence data.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Recheck the program's sequence data, then retransmit the program from the host computer.
------------------------------
Code: 12070?C1
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Prog Data Requested" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The requested program data was incorrect.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the production program and press the RESET button to clear the error, or restart the
machine. If the problem occurs again, use a reset-start to transmit the control software to the PMC. If the
problem is recurring, issues such as a faulty production program or PMC control board may be the cause.
第 749 页
------------------------------
Code: 12070?C2
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"No Specified Device D Exist" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The device data in question could not be found in the program.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the production program and press the RESET button to clear the error, or restart the
machine. If the problem occurs again, use a reset-start to transmit the control software to the PMC. If the
problem is recurring, issues such as a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?C3
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"No Specified Block D Exist" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The block data in question could not be found in the sequence data.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the production program and press the RESET button to clear the error, or restart the
machine. If the problem occurs again, use a reset-start to transmit the control software to the PMC. If the
problem is recurring, issues such as a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?C4
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"D Number Out of Range" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A device number in the sequence data is outside the valid range.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Recheck the device numbers in the program data, then retransmit the program from the host
computer.
------------------------------
Code: 12070?C5
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Program Number Out of Range" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The program number is outside the valid range.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the production program and press the RESET button to clear the error, or restart the
machine. If the problem occurs again, use a reset-start to transmit the control software to the PMC. If the
problem is recurring, issues such as a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?C6
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"No PMC Parameter Exist" (QP2)
第 750 页
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: There are no PMC parameters.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Retransmit the Proper data from the host computer.
------------------------------
Code: 12070?C7
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"PMC Memory Pool Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: PMC system check error #1 (memory pool error)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?C8
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"PMC Parameter Check Sum Err" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: PMC system check error no. 2 (parameter checksum error)
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?C9
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Prog Manage Directory Full" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The program management directory is full.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?CA
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Zero-divide error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: A zero-division error has occurred.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
第 751 页