FUJI错误代码查询 - 第809页

------------------------------ Code: 1207C?51 Display: "PMC?(ICM,SCU?) Error Code:********" (QP2) "Excessive Acce1. (Over 10%)" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,…

100%1 / 5282
------------------------------
Code: 1207C?22
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Positioning Time-out" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack positioning timeout.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy.
------------------------------
Code: 1207C?23
Display: "ICM (PMC?,SCU?) Error Code:********" (QP2)
"Power to the servo amp has been cut" (QP2)
Used by: QP202,QP203,QP242
Cause: The power to the servo amp has been cut. ? is the module number. "****" is the error code.
Remedy: Check around the power source for problems such as loose terminal blocks etc.
------------------------------
Code: 1207C?30
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Regenerative Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Regenerative error in the Q-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?31
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Excessive Deviation" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Excessive deviation in the Q-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy. Check whether the motor power wires (U, V, and W) or the encoder wire have
becomebroken or short-circuited. Servopack replacement may be necessary.
------------------------------
Code: 1207C?40
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overvoltage" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Excessive voltage has been detected in the Q-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy. Servopack replacement may be necessary.
第 808 页
------------------------------
Code: 1207C?51
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Excessive Acce1. (Over 10%)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Excessive acceleration detected in the Q-axis servopack (detected at 110%).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether the motor power wires (U, V, and W) or the encoder wire have become broken or
short-circuited.
------------------------------
Code: 1207C?60
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Absolute Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Absolute error in the Q-axis servopack (for the absolute value encoder only).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
faulty hardware such as servo amps or servo boards may be the cause.
------------------------------
Code: 1207C?62
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Parameter Destroyed" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack parameter destroyed.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?64
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Incorrect Parameter" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack parameter setting error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?65
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Watch-dog Monitoring Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack watchdog error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
第 809 页
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?66
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"YENET Comm Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack YENET communication error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Make sure that the communication cable between the PCM and the servopack has not become
disconnected.
------------------------------
Code: 1207C?6F
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Software Version Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Q-axis servopack software version error.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Servopack replacement may be necessary.
------------------------------
Code: 1207C?71
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overload (Momentary)" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Momentary overload of Q-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy. Check whether the motor power wires (U, V, and W) have become broken or short-
circuited.
------------------------------
Code: 1207C?72
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overload (Continuous)" (QP2)(QP132)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Continuous overload of Q-axis servopack.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check whether something is interfering with the axis, or whether the axis action has become
extremely heavy. Check whether the motor power wires (U, V, and W) have become broken or short-
circuited.
------------------------------
Code: 1207C?80
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Absolute Encoder Error" (QP2)
PM?? ERROR Code:******** (QP132)
第 810 页