FUJI错误代码查询 - 第882页
Display: Internal error.(Command error) Used by: Cause: After executing a command, it becomes extraordinary ending. Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be d…
Code: 1211100A
Display: Movement error.
Used by:
Cause: The operation didn't end normally by some factor.
Remedy: After removing an extraordinary factor, operation be resumed.
Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 1211100B
Display: Communication error.
Used by:
Cause: Communication between the host and the conveyor control board wasn't established in the time.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 12111014
Display: Internal error.(Event error)
Used by:
Cause: The event object became invalid.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12111015
Display: Internal error.(Timeout)
Used by:
Cause: The communication didn't complete to the conveyor control board with the host in the time.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12111016
Display: Internal error.(CRC error)
Used by:
Cause: An error has occurred during communication.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 12111017
Display: Internal error.(Retry over)
Used by:
Cause: Communication wasn't established to the conveyor control board after retry.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control board could be
damaged.
------------------------------
Code: 12111018
Display: Internal error.(Shared memory error)
Used by:
Cause: The version of the modules may not be adjusted.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12111019
第 881 页
Display: Internal error.(Command error)
Used by:
Cause: After executing a command, it becomes extraordinary ending.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 1211101A
Display: Internal error.(Failed to send command.)
Used by:
Cause: A command could not be send to the conveyor control board.
Remedy: After confirming whether or not the connection cable at the communication port doesn't come,
operation be resumed.
------------------------------
Code: 1211101F
Display: Internal error.(Failed to start dll.)
Used by:
Cause: Dll wasn't possible to start normally.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12111020
Display: Internal error.(Failed to terminate dll.)
Used by:
Cause: Dll wasn't possible to terminate normally.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12111028
Display: Internal error.(Abnormal parameter.)
Used by:
Cause: Because the parameter when using an API was an incorrect, the function could not be executed.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12111032
Display: Internal error.(Communication port error.)
Used by:
Cause: Conveyor control function wasn't possible to do the opening or the closing of the communication
port.
Remedy: Contact Fuji if this error cannot be corrected, because the conveyor control function could be
damaged.
------------------------------
Code: 12112001
Display: DxShell internal error.(Received data error.)
Used by:
Cause: The received data is incorrect data.
Remedy: Contact Fuji if this error cannot be corrected, because the LON communication function could
be damaged.
------------------------------
Code: 12112002
Display: DxShell internal error.(Queue buffer full.)
第 882 页
Used by:
Cause: DxShell API function is called by mistake.
Remedy: Obtain the trace data and contact Fuji.
------------------------------
Code: 12112010
Display: DxShell internal error.(Parameter error.)
Used by:
Cause: DxShell was set an invalid parameter.
Remedy: Obtain the trace data and contact Fuji.
------------------------------
Code: 12112011
Display: DxShell internal error.(No data.)
Used by:
Cause: It was not possible to get data from DxShell.
Remedy: Obtain the trace data and contact Fuji.
------------------------------
Code: 12112020
Display: DxShell internal error.(Response data timeout.)
Used by:
Cause: The time-out interval elapsed, and the response data did not receive.
Remedy: Contact Fuji if this error cannot be corrected, because the LON communication function could
be damaged.
------------------------------
Code: 12112021
Display: DxShell internal error.(Write data error.)
Used by:
Cause: It was not possible to do writing in LON communication port
Remedy: Contact Fuji if this error cannot be corrected, because the LON communication function could
be damaged.
------------------------------
Code: 12200001
Display: Failed to create shared memory.
Used by:
Cause: Either the system resources are insufficient, the operating system is corrupted, or the operating
system installation failed.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200002
Display: Failed to start process.
Used by:
Cause: The required file is either corrupted, or missing.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the hard disk
could be damaged.
------------------------------
Code: 12200003
Display: Failed to set the axes gear ratio.
Used by:
Cause: Failed to access the servo control board, or the servo board device driver is corrupted.
Remedy: Reinstall the recovery media software if this error cannot be corrected, because the servo control
board could be damaged.
第 883 页