FUJI错误代码查询 - 第907页

Code: 1220301C Display: Que error Used by: Cause: There is not a receiving data in the que. Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor- Shell could be damaged. -…

100%1 / 5282
------------------------------
Code: 12203015
Display: COM port error
Used by:
Cause: Failed to write to COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203016
Display: COM port error
Used by:
Cause: Failed to read from COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203017
Display: COM port error
Used by:
Cause: Failed to terminate COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203018
Display: Response code error
Used by:
Cause: The stepping motor controller has returned the code
which is not ACK or NAK.
Remedy: Replace stepping motor controller with a new one if this error is not corrected after reboot,
because the controller could be damaged.
------------------------------
Code: 12203019
Display: Response data error
Used by:
Cause: The stepping-motor-shell has not received data correctly.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220301A
Display: Response error
Used by:
Cause: There is no response from the stepping motor controller.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220301B
Display: Que error
Used by:
Cause: The number of que which stores a command became the maximum.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
第 906 页
Code: 1220301C
Display: Que error
Used by:
Cause: There is not a receiving data in the que.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220301D
Display: Que error
Used by:
Cause: Failed to clear que.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220301E
Display: Transmitting waiting state
Used by:
Cause: It is a transmitting waiting state.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 1220301F
Display: Receiving waiting state
Used by:
Cause: It is a receiving waiting state.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203020
Display: Que abort
Used by:
Cause: It had aborted before transmitting data to the que.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203021
Display: Que abort
Used by:
Cause: It had aborted during transmitting data to the que.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-Shell
could be damaged.
------------------------------
Code: 12203022
第 907 页
Display: Parameter error
Used by:
Cause: A parameter is not within the setting range.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203023
Display: Process over
Used by:
Cause: The process exceeded the number of the maximum.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12204000
Display: Load error
Used by:
Cause: The load cell control-accuracy pressure control shell
failed in loading of DLL.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control-
accuracy pressure control shell could be damaged.
------------------------------
Code: 12204001
Display: Load error
Used by:
Cause: The DLL-thread is not loaded in the load cell control-accuracy pressure control shell.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control-
accuracy pressure control shell could be damaged.
------------------------------
Code: 12204002
Display: Multiple open
Used by:
Cause: The load cell control-accuracy pressure control shell been already opened.
Remedy: Please cancel an error.
When this error comes out frequently, Reboot the machine.
Reinstall software if this error cannot be corrected after reboot, because the load cell control-
accuracy pressure control shell could be damaged.
------------------------------
Code: 12204100
Display: Internal function error
Used by:
Cause: In the load cell control shell,the a mapping file error or
significant digit over error occurred.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
------------------------------
Code: 12204101
Display: Port open error
Used by:
Cause: The load cell control shell failed in a port opening.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the load cell control
shell could be damaged.
第 908 页