FUJI错误代码查询 - 第97页

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part data item "D_ofst_x". ------------------------------ Code: 1101D056 Display: Used by: CP5,CP6,CP6M…

100%1 / 5282
transmitted program exceeds this range.
CP5(D14-27)
CP-6/6M/65,CP-642(D14-26)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D052
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D28-41)
CP-6/6M/65,CP-642(D27-39)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D053
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D42-55)
CP-6/6M/65,CP-642(D40-52)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D054
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D56-69)
CP-6/6M/65,CP-642(D53-65)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D055
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D70-83)
CP-6/6M/65,CP-642(D66-78)
第 96 页
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D056
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D84-97)
CP-6/6M/65,CP-642(D79-91)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D057
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D98-111)
CP-6/6M/65,CP-642(D92-104)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D058
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the vAlue is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D112-125)
CP-6/6M/65,CP-642(D105-117)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D059
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the
transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the
transmitted program exceeds this range.
CP5(D126-139)
CP-6/6M/65,CP-642(D118-130)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
第 97 页
Code: 1101D05A
Display:
Used by: CP5,CP6,CP6M,CP65,CP642,CP643
Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-
2.8mm. if the sixth bit is set to "1",the value is
+-5.0mm. For the CP5,device 1 or 30 in a pallet in the transmitted program exceeds this range. For the
CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the transmitted program exceeds this range.
CP5(D140-153)
CP-6/6M/65,CP-642(D131-140)
Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part
data item "D_ofst_x".
------------------------------
Code: 1101D05B
Display:
Used by: CP5
Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -
2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30
must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 154~167 on the CP5).
Remedy: Check the values in D_offset_CP.
------------------------------
Code: 1101D05C
Display:
Used by: CP5
Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -
2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30
must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 168~181 on the CP5).
Remedy: Check the values in D_offset_CP.
------------------------------
Code: 1101D05D
Display:
Used by: CP5
Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -
2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30
must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 182~195 on the CP5).
Remedy: Check the values in D_offset_CP.
------------------------------
Code: 1101D05E
Display:
Used by: CP5
Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -
2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30
must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 196~209 on the CP5).
Remedy: Check the values in D_offset_CP.
------------------------------
Code: 1101D05F
Display:
Used by: CP5
Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -
2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30
must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 210 on the CP5).
Remedy: Check the values in D_offset_CP.
第 98 页