IT Feeder Manual-45Series(English V2.0)Ver5 - 第33页
Part S tation Chapter 2. Part S tation 2-1 2.1. Overview Part Station, a m odule in IT Feeder S tation, is a W indows program that registers PartReels necessary for Off-Line PCB operations and creates Barcodes by using t…
Part Station
Chapter 2. Part Station
2-1
2.1. Overview
Part Station, a module in IT Feeder Station, is a Windows program that registers
PartReels necessary for Off-Line PCB operations and creates Barcodes by using the
newly created ReelCodes.
This program reads the registered part code in the machine from the database and creates
the Part Reel barcode for the corresponding part. Each station program of the IT feeder
consists of the Oracle DB that is controlled commonly.
Memo
Each part number used in all equipment must be controlled by a unique code. In other
words, once a part is registered, that part should have the same name. Otherwise, it will
be very difficult to control parts consistently. Therefore, at the beginning of system
construction, all workers should bear this in mind. For example, if 1005 Type 100Ohm
resistance is registered as A in CP40, it should be registered as A in other equipment
(CP45FV, CP60, CP40) also. Part registration data (Vision data, Align data, etc) can differ
from equipment to equipment, but one name should be used for all equipment so that Part
Station can always create the ReelCode for 1005 Type 100Ohm resistance as PartName
A.
Part Station always creates unique Reelcodes and duplicated codes are not created. The
purpose is to control parts by the reel. The basic installation directories and file structures
of Part Station are as follows. The user can change the installation directory if desired.
For detailed information on installation method, please refer to “Installation of Part
Station in IQ Feeder Station”.
Program location
C:\ Program Files\SamsungTechWin\ITFeeder\PartStation
System requirements to run this program are as follows.
CPU: IBM PC compatible Pentium over 266Mhz (Pentium 333MHz or higher
processor is recommended)
OS: Over Microsoft Windows 2000
Memory: Over 128MB (over 256MB is recommended)
Hard Disk: 2MB hard disk space (need to secure at least 2GB of free hard disk
space)
The Part Station system consists of the Part Station program, Oracle Database Client,
waste Reel.bak for backup files, and Recycle.dat. The operation of Feeder Station and IQ
Module of the equipment is interrelated.
Samsung Intelligent Feeder System
The Data controlled by Part Station is as follows.
Table 2-1. DB data for managing the IQ Feeder
Classification Code Type/size Item Note
BOMCODE Text / 24 (PartName)
INS_DATE Date Date of registration
BOM
Data
DESC Text / 50 Description
REELCODE Text / 20 Part Reel Code
BOMCODE Text / 24 (PartName)
COUNT Num / Long Number of parts
INS_DATE Date ReelCode registration date
UPD_DATE Date Reel data update date
PartReel data
DESC Text / 50 Description
FEEDER_ID Text / 10 Feeder RF-ID
FEEDER_TYPE Num / Int Feeder Type
REELCODE Text / 20 Part Reel Code
MC_CODE Text / 20 Equipment in use
CART_ID Text / 10 CART ID in use
INS_DATE Date Feeder registration date
UPD_DATE Date Feeder data update date
Feeder data
DESC Text / 50 Description
2.1.1. Configuration Of System Screen
The system screen consists of the following.
Main menu
Consists of Work, Option, View, and Help. Detailed information on each menu will
be provided later.
Toolbar
Located under the Main menu. It consists of 6 icons. Each icon has respective
keyboard shortcut. When a menu is executed, the respective icon turns grey and it is
disabled. When another menu is executed, it is enabled again. When the mouse
pointer is located on a menu, respective tool tip appears, giving a brief description of
the menu.
Execution window
This is where the task is actually carried out. The results of various queries and
registration and other commands are displayed here.
Status bar
Current time, description of active menu, and other user changes are displayed here.
2-2