EUKYX-199-5100_G5S2_Instruction_Vol5_E - 第17页
Safety Precautions EUKYX-Safety 199-X100 Safe-9 4. Aler t Indicati ons in In struction Manua l The f ollow ing su mm ar izes t he pr ec aut ion ar y ite ms an d the l oc atio n of al er t ind ica tion s in th e instructi…
Safety Precautions
EUKYX-Safety
199-X100
Safe-8
DECLARATION OF CONFORMITY
We,
YAMAHA MOTOR CO., LTD.
127 Toyooka, Kitaku, Hamamatsu, Shizuoka 433-8103, Japan
declare under our sole responsibility that the product(s) or product conguration(s)
- Description : SMT equipment
- Model name (Type No.) : SIGMA-G5SII (KYX-000)
- Serial No. : from Y30000 to later
meet(s) the provisions of the following directives:
Machine Safety Directive 2006/42/EC
Electro Magnetic Compatibility Directive 2014/30/EU
• In accordance with these directives a Technical Construction File is filed.
The used harmonized standards are:
EN ISO 12100:2010 Basic concepts, general principles for design
EN 614-1:2006+A1:2009 Ergonomic design principles
EN ISO 13857:2008 Safety distances
EN 349:1993+A1:2008 Minimum gaps
N 60204-1:2006+A1:2009 Electrical equipment of machines
EN 55011:2009+A1:2010 EMC Emission of ISM Equipment (Classication: Group 1, Class A)
EN 61000-6-2:2005 EMC Immunity for Industrial Environments
Person authorized to compile the technical le in Europe:
Yamaha Motor Europe N.V., Niederlassung Deutschland,
Geschäftsbereich IM (YME)
(address) Hansemannstrasse 12, 41468 Neuss, Germany
3. Common Precautionary Items
Safety Precautions
EUKYX-Safety
199-X100
Safe-9
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in the
instruction manual.
Alert Indications described as "
DANGER
"
Alert Description Pages
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them. Doing
otherwise will cause personal injury (serious accident).
• Only qualified maintenance personnel should detach the covers.
• The machine should be operated with the covers being attached.
• If a cover is detached, be sure to reattach it.
• Be sure to close the covers (door type) before operating the
machine.
•
Do not disengage the interlock mechanism of the covers (door
type).
"2.2.3" in "Chapter 1 (Vol. 1)"
"1.1.3" in "Chapter 3 (Vol. 1)"
4. Alert Indications in Instruction Manual
Safety Precautions
EUKYX-Safety
199-X100
Safe-10
Alert Indications described as "
WARNING
"
Alert Description Related Items
Be sure to keep the all covers (door type) closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in "Chapter 1 (Vol. 1)"
Before performing maintenance work, shut off the power breaker
and lock the power breaker with the padlock.
"2.3.1" in "Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"3.4" in "Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being attached.
"3.8.1" in "Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"1.2.2" in "Chapter 3 (Vol. 1)"
"2.2.4" in "Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
tasks carefully through the specified procedures.
"1.1" in "Chapter 1 (Vol. 4)"
Before maintenance work, shut off the power breaker and lock
the power breaker with the padlock. Designate a person who can
have charge of the padlock key.
"1.1" in "Chapter 1 (Vol. 4)"
Pay special attention to the cutter blade when maintaining.
• You may cut your hand or finger with a cutter blade.
Make sure to wear gloves and maintain with caution.
• Make sure to attach a cutter blade cover when
maintaining a cutter for protection
“4.6.3” in “Chapter 1 (Vol. 4)”
4. Alert Indications in Instruction Manual