EUKYX-199-5100_G5S2_Instruction_Vol5_E - 第18页

Safety Precautions EUKYX-Safety 199-X100 Safe-10 Aler t Indicat ions described as " W ARNING " Alert De scription Related Items Be s ur e to kee p th e al l cove rs ( do or t yp e ) cl os ed to avo id any dange…

100%1 / 191
Safety Precautions
EUKYX-Safety
199-X100
Safe-9
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in the
instruction manual.
Alert Indications described as "
DANGER
"
Alert Description Pages
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them. Doing
otherwise will cause personal injury (serious accident).
• Only qualified maintenance personnel should detach the covers.
• The machine should be operated with the covers being attached.
• If a cover is detached, be sure to reattach it.
• Be sure to close the covers (door type) before operating the
machine.
•
Do not disengage the interlock mechanism of the covers (door
type).
"2.2.3" in "Chapter 1 (Vol. 1)"
"1.1.3" in "Chapter 3 (Vol. 1)"
4. Alert Indications in Instruction Manual
Safety Precautions
EUKYX-Safety
199-X100
Safe-10
Alert Indications described as "
WARNING
"
Alert Description Related Items
Be sure to keep the all covers (door type) closed to avoid any
danger when the automatic operation is started or during the
automatic operation.
"2.2.3" in "Chapter 1 (Vol. 1)"
Before performing maintenance work, shut off the power breaker
and lock the power breaker with the padlock.
"2.3.1" in "Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to work
inside the machine.
This machine uses strong permanent magnets in the moving
areas of the X/Y beams.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"3.4" in "Chapter 1 (Vol. 1)"
If the bank feeder change cart is not set, a clearance will be left
at the feeder setting area and the operator will be exposed to
danger.
Be sure to use the machine with the bank feeder change cart
being attached.
"3.8.1" in "Chapter 1 (Vol. 1)"
Those who wear implanted pacemakers are not allowed to
handle the tape feeders.
The pacemaker may be affected by the magnetism and a serious
accident will result.
"1.2.2" in "Chapter 3 (Vol. 1)"
"2.2.4" in "Chapter 3 (Vol. 1)"
Only a well-trained service person should perform maintenance
tasks carefully through the specified procedures.
"1.1" in "Chapter 1 (Vol. 4)"
Before maintenance work, shut off the power breaker and lock
the power breaker with the padlock. Designate a person who can
have charge of the padlock key.
"1.1" in "Chapter 1 (Vol. 4)"
Pay special attention to the cutter blade when maintaining.
• You may cut your hand or finger with a cutter blade.
Make sure to wear gloves and maintain with caution.
• Make sure to attach a cutter blade cover when
maintaining a cutter for protection
“4.6.3” in “Chapter 1 (Vol. 4)”
4. Alert Indications in Instruction Manual
Safety Precautions
EUKYX-Safety
199-X100
Safe-11
Alert Indications described as "
CAUTION
"
Alert Description Related Items
Avoid hand and finger injuries.
• Be careful to avoid hand and finger injuries when closing the covers
(door type).
• Hold the hand grip firmly and open or close the cover (door type)
slowly.
"2.2.3" in "Chapter 1 (Vol. 1)"
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
"2.3.2" in "Chapter 1 (Vol. 1)"
Before operating the machine, confirm that there are no people
around the machine (especially, the other side of the machine
operation) and no objects such as tools and parts are left around the
machine.
"3.2" in "Chapter 1 (Vol. 1)"
"1.1.4" and "4.1" in
"Chapter 3 (Vol. 1)"
Depending on the setting for the PCB discharge from the input
machine to this machine or from this machine to the output machine,
the conveyor may move at the moment when the PCB has been
removed. In such cases, your finger might be caught.
"3.2" in "Chapter 1 (Vol. 1)"
Strong Magnetism
• Do not bring any metal of high magnetizability close to this.
Otherwise, such metal will easily be magnetized and attracted,
causing an injury to the operator or breakdown of the machine.
• Do not bring any object such as a magnetic card and a watch
close to the machine. Such an object can easily be affected by
the magnetism.
The data of the magnetic card might be cleared or a watch, etc.,
may be damaged due to the strong magnetism.
"3.4" in "Chapter 1 (Vol. 1)"
4. Alert Indications in Instruction Manual