EUKYX-199-5100_G5S2_Instruction_Vol5_E - 第22页

Safety Precautions EUKYX-Safety 199-X100 Safe-14 5 . Aler t L abels The a le r t la be ls de scr ib ed o n the fo llowi ng pag es a re u se d for th is ma chi ne. Plea se r ea d the i nst ru ct ions o n ea ch la be l ca …

100%1 / 191
Safety Precautions
EUKYX-Safety
199-X100
Safe-13
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
When the tape feeder connecting cable is connected to the tape
feeder, unless the tape feeder is held securely, the tape feeder
holding guide may come off and drop from the tape feeder unit.
Connect the cable with the tape feeder held securely.
"2.2.6.1" in
"Chapter 3 (Vol. 1)"
There are some heavy feeder models. When such feeders are
removed with one hand, the weight of the feeder removed from
the guide cannot be supported by one hand and the feeder might
drop. Remove the feeder using both hands to support it.
"2.2.6.2" in
"Chapter 3 (Vol. 1)"
The padlock key should be kept in such a way that nobody except the
personnel in charge of maintenance can supervise it.
"4.3" in "Chapter 2 (Vol. 1)"
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
inside the machine. Avoid hand and finger injuries.
"2.3.5" in "Chapter 3 (Vol. 1)"
"4.1" and "4.2.1" in
"Chapter 6 (Vol. 2)"
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
"1.1" in "Chapter 1 (Vol. 4)"
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the DC power supply and the servo amplifier go "OFF" in 10 minutes
or more after the power breaker is set to "OFF".
"1.1" in "Chapter 1 (Vol. 4)"
After making sure that the power supply has been stopped and
the cutter blades are closed, start maintenance.
During maintenance, do not touch the cutter blade.
“4.6.1” and "4.6.2" in
"Chapter 1 (Vol. 4)"
4. Alert Indications in Instruction Manual
Safety Precautions
EUKYX-Safety
199-X100
Safe-14
5. Alert Labels
The alert labels described on the following pages are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object. Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact YAMAHA sales representatives
for the replacement with a new one.
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-15
Location of Alert Labels
The alert labels are affixed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
4
10-0339-
CAUTION
When the feeder base is moved up and down
and your finger is put into the moving section,
you might get injured.
Do not put your hand into the moving section.
Your hand or finger might be crushed.
Front View of Machine
(1)
(8)
(3)
(16)
(5)
(11)
(2) (2)
(11)
(4)
(18)
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be affected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be affected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be affected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be affected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
CAUTION
When the feeder base is moved up and down
and your finger is put into the moving section,
you might get injured.
Do not put your hand into the moving section.
Your hand or finger might be crushed.
CAUTION
When the feeder base is moved up and down
and your finger is put into the moving section,
you might get injured.
Do not put your hand into the moving section.
Your hand or finger might be crushed.
10-0339-
CAUTION
When the feeder base is moved up and down
and your finger is put into the moving section,
you might get injured.
Do not put your hand into the moving section.
Your hand or finger might be crushed.
Never disconnect the connector during
the feeder base lifting operation.
Doing so might cause a system malfunction.
10-0333-
Never disconnect the connector during
the feeder base lifting operation.
Doing so might cause a system malfunction.
S00-EUKYX-00
5. Alert Labels