EUKYX-199-5100_G5S2_Instruction_Vol5_E - 第32页
Safety Precautions EUKYX-Safety 199-X100 Safe-24 Aler t Labels a nd Description No. Al er t L ab el s an d De sc rip ti on (1) Description ● Str ong p er man ent ma gne ts a re use d in t he mov ing m ec han ism s of the…
Safety Precautions
EUKYX-Safety
199-X100
Safe-23
00-0293-
(14)
S09-EUKYX-00
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-24
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
●
Strong permanent magnets are used in the moving mechanisms of the X/Y beam. Those who
wear implanted pacemakers should not work inside the machine. The pacemaker may be
affected by magnetism, causing a serious accident.
(2)
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be a ffected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
Description
●
Permanent magnets are used in the tape feeding and cover tape take-up sections of the tape
feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape feeders.
Otherwise, the pacemaker may be affected by magnetism, causing a serious accident.
(3)
Description
●
When maintenance or checks are performed, make sure to turn off the power to the machine or
air source. When maintenance or checks are performed with the power or air turned ON, an
electric shock or injury might be caused.
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-25
No. Alert Labels and Description
(4)
Description
●
Only well-trained service personnel shall replace the cutter blades. Otherwise, a hand injury,
etc., will result.
(5)
Description
●
This label indicates that high voltage is applied to the area. Residual voltages may remain
behind for a few minutes in the internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC power supply and
the servo amplifier go "OFF" in 10 minutes or more after the power breaker is set to "OFF".
(6)
Description
●
Before connecting to the breaker's primary power leading-in section, connect the grounding
cable (PE). Imperfect grounding will cause an electric shock.
5. Alert Labels