EUKYX-199-5100_G5S2_Instruction_Vol5_E - 第33页
Safety Precautions EUKYX-Safety 199-X100 Safe-25 No. Al er t L ab el s an d De sc rip ti on (4) Description ● Onl y well -tra ine d se r vi ce p er so nnel s hall r ep lac e the c ut te r bla des. O th er w is e, a hand …
Safety Precautions
EUKYX-Safety
199-X100
Safe-24
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
●
Strong permanent magnets are used in the moving mechanisms of the X/Y beam. Those who
wear implanted pacemakers should not work inside the machine. The pacemaker may be
affected by magnetism, causing a serious accident.
(2)
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be a ffected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
Description
●
Permanent magnets are used in the tape feeding and cover tape take-up sections of the tape
feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape feeders.
Otherwise, the pacemaker may be affected by magnetism, causing a serious accident.
(3)
Description
●
When maintenance or checks are performed, make sure to turn off the power to the machine or
air source. When maintenance or checks are performed with the power or air turned ON, an
electric shock or injury might be caused.
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-25
No. Alert Labels and Description
(4)
Description
●
Only well-trained service personnel shall replace the cutter blades. Otherwise, a hand injury,
etc., will result.
(5)
Description
●
This label indicates that high voltage is applied to the area. Residual voltages may remain
behind for a few minutes in the internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC power supply and
the servo amplifier go "OFF" in 10 minutes or more after the power breaker is set to "OFF".
(6)
Description
●
Before connecting to the breaker's primary power leading-in section, connect the grounding
cable (PE). Imperfect grounding will cause an electric shock.
5. Alert Labels
Safety Precautions
EUKYX-Safety
199-X100
Safe-26
No. Alert Labels and Description
(7)
CAUTION
10-0146-
Do not let your finger
get caught in this.
An injury will result.
Description
●
When a covers (door type) is opened or closed, be sure to hold the grip firmly and slowly move
the cover up or down. Otherwise, your hand and fingers might get caught in the door and get
injured.
(8)
Description
●
Before maintenance work, shut off the power breaker and lock it with the padlock.
●
Even when the power breaker is set to "OFF", the primary line is powered, making it possible to
cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.
(9)
Do not put any object
on this section.
This might damage the machine.
10-0326A
Description
●
Do not put any object on the machine. Doing so might damage the machine. This might damage
the machine.
5. Alert Labels