EUKYX-199-5100_G5S2_Instruction_Vol5_E - 第45页

EUKYX 199-5100 Cont-1 Contents Page Chapter 1 Pneumatic and Mounting Diagrams 1. Pneumatic Diagrams ............................................. ................... 1-1 1 . 1 Enti r e System ........ ...................…

Safety Precautions

EUKYX-Safety

199-X100

Safe-36

Handling solvents (including solder and adhesive)

Cleaning organic solvents, such as isopropyl alcohol (IPA) and ethanol are used for the maintenance

of this machine (including optional units). Additionally, the solder paste printers, dispensers, and

some hybrid placers and flip bonders use solder, flux, or bond, etc. during normal production. Since

many of these materials include organic solvents, great care should be taken when handling them.

■

Cautions on handling solvents

1. Hazards to human health

Organic solvents constantly vaporize and contaminate the surrounding atmosphere. Inhaling or

coming in contact with organic solvent vapor may cause serious damage to human health.

2. Flammability

Organic solvents are highly flammable substances and can easily catch fire if handled improperly.

3. Adverse effects on machines

Some kind of solvent may deteriorate parts used in the machine, electric cable sheathes, and other

resin parts.

■

To avoid hazards of solvents

• Be careful not to inhale toxic vapors of solvents for extended periods.

• Do not use solvents near fire or flame. Keep solvents away from flame or fire.

• Use only the specified solvent in the correct manner. Do not reuse any solvent

repeatedly, and do not mix with other solvents or chemicals.

• Check the contents of the safety data sheet (MSDS/SDS), thoroughly notify

work personnel of toxicities of included chemical materials and measures to be taken in case

of an accident, and take necessary countermeasures.

• Use appropriate safety gear (safety goggles, protective gloves, and respiratory protective

devices) corresponding to the solvent or material types.

If no safety data sheets are supplied with solvents or materials you have purchased, be sure to

acquire the safety data sheets from the suppliers.

Note

6. Precautionary Items for Correct Operations

EUKYX

199-5100

Cont-1

Contents

Page

Chapter 1 Pneumatic and Mounting Diagrams

1. Pneumatic Diagrams ................................................................ 1-1

1.1 Entire System ............................................................................. 1-1

1.2 Main Body 1 ............................................................................... 1-2

1.3 Main Body 2 ...............................................................................1-3

1.4 Conveyor ................................................................................... 1-4

1.5 Positioning Unit ..........................................................................1-5

1.5.1 Normal ................................................................................ 1-5

1.5.2 In Traverse cart Attachment .................................................. 1-6

1.6 Nozzle Stocker ........................................................................... 1-7

1.7 Head Unit ..................................................................................1-8

1.8 Feeder Base .............................................................................. 1-9

1.9 Multi-Functional Head Unit ........................................................ 1-10

1.10 Nozzle Stocker for Multi-Functional Nozzle ................................1-11

2. Mounting Diagrams ................................................................ 1-12

2.1 Main Body 1 ............................................................................. 1-12

2.2 Main Body 2 ............................................................................. 1-13

2.3 Conveyor 1 .............................................................................. 1-14

2.4 Conveyor 2 .............................................................................. 1-15

2.5 Positioning Unit ........................................................................ 1-16

2.6 Positioning Unit (In Drop Prevention Unit Attachment) ................. 1-17

2.7 Nozzle Stocker ......................................................................... 1-18

2.8 Head Unit ................................................................................ 1-19

2.9 Feeder Base ............................................................................ 1-20

2.10 Nozzle Stocker for Multi-Functional Nozzle ............................... 1-21

2.11 Multi-Functional Head Unit ....................................................... 1-22

Chapter 2 Sensor and Load Layout

1. Sensor and Load Layout .......................................................... 2-1

1.1 Layout under the Base ................................................................ 2-1

1.2 Panel Layout .............................................................................. 2-2

1.3 Cover Layout .............................................................................2-3

1.4 Beam Y-Axis Layout ...................................................................2-4

1.5 Beam X-Axis Layout ...................................................................2-5

1.6 Feeder Cart Layout ....................................................................2-6

1.7 Cutter Section Layout .................................................................2-7

1.8 Head Section Layout (General View) ...........................................2-8

EUKYX

199-5100

Cont-2

Contents

Page

1.9 Head Section Layout (Connector Box Section) .............................2-9

1.10 Head Section Layout (Head Rotation Section) .......................... 2-10

1.11 Head Section Layout (Nozzle Selection Section) ........................2- 11

1.12 Head Section Layout (Nozzle U/D Section) ............................... 2-12

1.13 Head Section Layout (Head U/D Section) ................................. 2-13

1.14 Nozzle Stocker Section Layout ................................................ 2-14

1.15 Conveyor Section Layout (Outside) .......................................... 2-15

1.16 Conveyor Section Layout (Inside) ............................................ 2-16

1.17 Component Recognition Camera Layout ................................... 2-17

1.18 Locating Section Layout .......................................................... 2-18

1.19 Multi-Functional Head Section Layout ....................................... 2-19

1.20 Nozzle Stocker for Multi-Functional Nozzle Section Layout ..................2-20

Chapter 3 Parts Location

1. Parts Location ......................................................................... 3-1

1.1 Layout under the Base (General View) ......................................... 3-1

1.2 Drawing for the General Electrical Blocks .....................................3-2

1.3 Front Side .................................................................................. 3-3

1.3.1 Power Breaker .....................................................................3-4

1.3.2 Noise Filter ...........................................................................3-5

1.3.3 LED Light Control PCB .........................................................3-6

1.3.4 XY Motor Amplifier Unit Front ...............................................3-7

1.3.5 CPU1 .................................................................................. 3-8

1.3.6 CPU2 ..................................................................................3-9

1.3.7 Head Section Motor Amplifier Unit ....................................... 3-10

1.4 Rear Side .................................................................................3- 11

1.4.1 Relay PCB ........................................................................ 3-12

1.4.2 I/O PCB ............................................................................ 3-13

1.4.3 XY Motor Amplifier Unit (Rear) ............................................ 3-14

1.4.4 DC Power Supply Unit ........................................................ 3-15

1.4.5 Vacuum Pump ................................................................... 3-16

1.5 Side View PCB Panel ............................................................... 3-17

1.6 Side Panel Front .................................................................... 3-18

1.6.1 Inside of the panel ............................................................. 3-18

1.6.2 Side panel Front (Outside) ................................................. 3-19

1.7 Side Panel (Center) .................................................................. 3-20

1.8 Side Panel (Rear) ..................................................................... 3-21