wire-bonder.pdf - 第89页
WEST•BOND MODEL 454647E SER IES INSTRUCTION MANUAL 83 ADVANCED PROGRAMMING Edit Bond Depth This option allows the operator to set how many Z motor ste p are to be taken after the work has been contacted. By following the…
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
82
ADVANCED PROGRAMMING
Edit Bond Force
This menu is only available if the Dual Force option has been selected. This menu will allow the operator
to specify whether a bond should receive High or Low force. This can be changed from bond to bond.
EDIT BOND FORCE
FORCE for Bond #5: High
5=High 6=Copy
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Low G=Next option
To edit “Bond Force”
From the H
OME menu press 4 (EDIT), A (BOND EDIT), 4 (EDIT BOND), then 6 (FORCE)
Key Format:
Previous
Menu
1
Go To
Device/Type
2
Home
3
4
High
5
Copy
6
Previous
bond
7
Suggest
8
Next bond
9
Previous
Option
A
Low
0
Next option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
83
ADVANCED PROGRAMMING
Edit Bond Depth
This option allows the operator to set how many Z motor step are to be taken after the work has been
contacted. By following the wire into the work, the tool can negate the dampening effects of a soft
surfaced substrate.
EDIT BOND DEPTH
Depth for Bond #3: 2 Z steps
4=Key in 5=Increase 6=Copy
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Decrease G=Next option
To edit “Bond Depth”
From the H
OME menu press 4 (EDIT), A (BOND EDIT), 4 (EDIT BOND), then 7 (BOND DEPTH)
Key Format:
Previous
Menu
1
Go To
Device/Type
2
Home
3
Key in
4
↑
Increase
5
Copy
6
Previous
bond
7
Suggest
8
Next bond
9
Previous
Option
A
↓
Decrease
0
Next option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
84
ADVANCED PROGRAMMING
Edit Inhibit Auto Mode
If this mode is turned on, the Bonding sequence will be interrupted at the specified bond allowing the
operator to manually align the bond. The operator needs to hold the “G” key or the GO button during the
bonding sequence for the inhibit mode to take place.
INHIBIT AUTO MODE
INHIBIT AUTO MODE for Bond #5: Off
5=On 6=Copy
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Off G=Next option
To edit “Inhibit Auto Mode”
From the H
OME menu press 4 (EDIT), A (BOND EDIT), 4 (EDIT BOND), and then 8 (INHIBIT AUTO MODE)
Key Format:
Previous
Menu
1
Go To
Device/Type
2
Home
3
4
On
5
Copy
6
Previous
bond
7
Suggest
8
Next bond
9
Previous
Option
A
Off
0
Next option
G