00198369-01_UM_SIPLACE-XSerieS-TX-DockingStation_DE_EN_ZH - 第45页

User manual Docking station SIPLACE X- Series S / TX 1 Introduction Edition 02/2018 1.1 Overview 45 1 Introduction This user manu al is a guide or refe rence work for operating and s etting up the SIPLACE ® docking stati…

All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be

precluded entirely, we cannot guarantee full consistency.

However, the information given in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

This is the original user manual.

ASM Assembly Systems GmbH&Co.KG

Rupert-Mayer-Str. 44

81379 Munich

Germany

www.asm-smt.com

Item no.:00198369-01

Printed by ASM Assembly Systems

User manual Docking station SIPLACE X-Series S / TX 1 Introduction

Edition 02/2018 1.1 Overview

1 Introduction

This user manual is a guide or reference work for operating and setting up the SIPLACE

docking

station for SIPLACE X-Series S and SIPLACE TX component trolleys.

1.1 Overview

The docking station is an additional unit for the pre-setup area and serves as a link between the

pre-setup area and the SIPLACE X-Series S and SIPLACE TX component trolleys. It allows the

component trolleys to be set up externally with feeder modules, function tests and setup verifica-

tion.

Fig. 1.1 - 1 Docking station SIPLACE X-Series S / TX

(1) Controls (4) Rails for guiding and docking the change-

over table

(2) X-Series S and TX COT insert (5) Clamping lever for locking the component

trolley

(3) Protective plate with warning sign W204 EDIF (energy and data interface)

1 Introduction User manual Docking station SIPLACE X-Series S / TX

1.1 Overview Edition 02/2018

The main tasks performed by the docking station are as follows:

– Supply of energy to the component trolley and X feeder modules

– Provision of an infrastructure for communication between the pre-setup location PC and the

feeder modules

With the help of the docking station, the operator can perform function tests to the X feeder mod-

ules outside the production environment and can check the setup. There are two rows, each with

four docking stations, connected via the CAN bus of the pre-setup PC. Each docking station has

its own power and compressed air connection.

The COT insert for the docking station can be adjusted to the required PCB conveyor height. The

component trolley is pushed into the docking station for the pre-setup process. The component

trolley slides along the COT insert rails with the roller bearings on its sides, asm far as the energy

and data interface connection. The EDIF in the COT insert unit is positioned precisely in relation

to the changeover table with the feeder module EDIF and fixed in this position with the two hori-

zontal tensioners.The protective panels prevent access to the component trolley rollers, when this

is pushed into the docking station.