00198622-02_IM_WES7_WIN10_EN_DE - 第12页
WES7 / Win10 - Installation Manual 04/2019 Edition 12 4 Installation 4.1 Overview Choose computer configuration SIPLACE WES7 Configurator SIPLACE Win10 Configurator Install and calibrate Touchscreen BIOS settings on the …
WES7 / Win10 - Installation Manual 04/2019 Edition
11
Name
SIMATIC BoxPC 627D/827D
CPU / clock frequency
Intel® Core(TM) i3 / 2,40 GHz
Exchange PC for 60x:
Intel® Celeron® G1820TE / 2,20 GHz
RAM
4 GB
Harddisk
SSD
Serial interfaces
1
USB interfaces
Yes
Network
2x 1000 MBit
Table 3-7: SIMATIC BoxPC 627D/827D
Name
SIMATIC MicroBox 427D
CPU / clock frequency
Intel® Core
(TM)
/ 1,6 GHz
RAM
4 GB
Harddisk
SSD
Serielle Schnittstellen
1
USB interfaces
Yes
Network
2x 1000 MBit
Table 3-8: SIMATIC MicroBox 427D
Name
iBASE ABP 102-A
CPU / clock frequency
Celeron® Dual Core T3100 / 1.9 GHz
RAM
2 GB
Harddisk
HDD
Serial interfaces
1
USB interfaces
Yes
Network
2x 1000 MBit
Table 3-9: iBASE ABP 102-A
Name
iBASE ABP 402-A
CPU / clock frequency
Intel® Celeron® CPU 1020E/ 2.2 GHz
RAM
4 GB
Harddisk
SSD (SX), HDD (E by SIPLACE)
Serial interfaces
2
USB interfaces
Yes
Network
2x 1000 MBit
Table 3-10: iBASE ABP 402-A
WES7 / Win10 - Installation Manual 04/2019 Edition
12
4 Installation
4.1 Overview
Choose computer configuration
SIPLACE WES7 Configurator
SIPLACE Win10 Configurator
Install and calibrate Touchscreen
BIOS settings on the Station / Coplan /
BulkFeeder X computer
Perform BIOS settings
Back up the machine data
BIOS update on the Station / Coplan /
BulkFeeder X computer
Perform BIOS update
Install WES7/Win10
(DVD or USB stick
suitable for the
computer)
Restore the initial configuration
See section 4.2.
See section 4.2.
Installing the operating system, see section 4.3.
See section 4.3.3►.
See chapter 5.
Figure 4-1: Installation
WES7 / Win10 - Installation Manual 04/2019 Edition
13
4.2 BIOS Update/Settings
A BIOS update shall only be performed if requested. No BIOS updates have to be performed on
the current computers at present.
► Perform the BIOS settings as follows.
The following steps have to be performed before installing Windows Embedded Standard 7:
► Press the F2 key to access BIOS after the computer has started.
► Press the F9 key (Setup Default) to set the default settings.
► Change the BIOS settings as described in the following section.
4.2.1 BIOS Settings for SIMATIC BoxPCs 627B / 827B
► Set the following values in BIOS:
Under Main / Hardware Options:
PCI-MPI/DP [ Disabled ]
Safecard Functions [ Disabled ]
Fan Control [ Enabled ]
Under Advanced / SATA/PATA Configuration:
SATA Controller Mode [ Compatible ]
Under Advanced:
Core Multi-processing [ Enabled ]
Under Boot the following boot priority sequence:
1: USB CDROM: 2: SATA0: xxxxxxxxxx 3: ......
Under Exit / Profile:
Profile: [User]
► Exit BIOS with Exit / Exit saving changes / Yes.