00198622-02_IM_WES7_WIN10_EN_DE - 第21页
WES7 / Win10 - Installation Manual 04/2019 Edition 21 As soon as the following wi ndow is displayed, the configuration h as finished, and you can cl ose the window. Figure 4- 12 : Operating system co nfiguration Win10 fi…
WES7 / Win10 - Installation Manual 04/2019 Edition
20
Under Windows 10 IoT, you must wait for the following window (takes a few seconds):
Figure 4-9:Confirming Registry settings Win10
► Click OK.
The following window is displayed:
Figure 4-10: User Account Control Win10
► Enter the operator password.
► Click Yes.
The following window is displayed:
Figure 4-11: Operator configuration Win10 finished
► Click OK.
► Log in as ASM_Admin after the automatic sign out.
WES7 / Win10 - Installation Manual 04/2019 Edition
21
As soon as the following window is displayed, the configuration has finished, and you can close the
window.
Figure 4-12: Operating system configuration Win10 finished
► If the machine is equipped with a Multitouch Monitor or no touch screen is used (Coplan /
BulkFeeder X computer), remove the software CD from the DVD drive or release the USB stick
and remove it from the USB interface.
► If a touch screen driver must be installed, follow the instructions in chapter 5.
The installation and configuration of the Windows operating system (WES7, Win10) is completed
now.
If you have installed the Windows operating system on a station computer:
► Install the SIPLACE machine software as described in the installation manual for the station
software.
If you have installed the Windows operating system on a Coplan / BulkFeeder X computer:
► Follow the instructions in the respective Assembly Instruction for the 3D Coplanarity Module,
item no:s. [00195344-xx] (for X-series), [00196842-xx] (for SX1/SX2) and [00197395-xx] (for
X-series S) or the instructions in the Operating Manual for BulkFeeder X, item no. [00198045-
xx] if you install the Windows operating system on a Coplan or BulkFeeder X computer.
► Install the SIPLACE machine software as described in the installation manual for the station
software.
WES7 / Win10 - Installation Manual 04/2019 Edition
22
5 Installing and Calibrating the Touch Screen
Now the touch screen can be installed and calibrated (station computer only without Multitouch
Monitor). For this, perform the following steps:
► Log on as ASM_Admin and enter a password.
► In the SIPLACE Configurator, click on the Add-ons and Touch Screen Driver button under
Optional Installation to select and install a touch screen driver. Follow the installation
instructions.
► After installation, calibrate the touch screen as described in the installation manual for the
station software.
► Remove the software CD from the DVD drive or release the USB stick and remove it from the
USB interface.