00195398-0103-AI-01005Paket_DE_EN - 第41页
Asse mb ly In st ruct i on s 0100 5- Pac ket Edi t io n 12 /200 7 41 3 Asse mbly Instruc tions 10 05 -P ac k- ag e S IPL A CE D1 / D2/ D4 NOTE: This ass embly in structions guid e explai ns the 0100 5 com ponents. In A m…
Montageanleitung 01005-Paket
Ausgabe 12/2007
40
2.1.2.3 Fehlerbild: beim Bestücken
Grundsätzlich wird für das präzise Setzen der Bauelemente eine Maschinengenauigkeit von min-
destens 80µm bei 4 Sigma vorausgesetzt. Ein Nachweis kann mittels CM-Controller oder Mess-
maschine durchgeführt werden. 2
Ein weiterer maßgebender Einflussfaktor auf die Bestückqualität ist die Lotpaste und der Druck.
Eine Hilfestellung bietet dabei das SIPLACE 01005 Prozess-Handbuch. 2
Assembly Instructions 01005-Packet
Edition 12/2007
41
3 Assembly Instructions 1005-Pack-
age SIPLACE D1/D2/D4
NOTE:
This assembly instructions guide explains the 01005 components. In American English language
parts, 1005 is the official description for a component measuring 0,4 x 0,2 mm. Since metric length
and width measurement units are standard in the Asian speaking parts of the world, this compo-
nent bears the description "0402"(metric measurements) in Asian countries. 3
Assembly Instructions 01005-Packet
Edition 12/2007
42
3.1 Function Description
In order to place 01005 components on a SIPLACE D1/D2/D4 machine, retrofitting as described
in the following section is required. In addition, certain prerequisites must be fulfilled. 3
The 12-Segment C&P head (DLM 3) must be equipped with the high-resolution camera (type 38).
The placement is executed with a specific sleeve and a 905 nozzle which must be attached to the
placement head. A special feeder is used to ensure optimal loading of the components. 3
Fig. 23 12-segment collect & place head with component camera, sleeve and nozzle
(4) Component Camera C&P, Type 38, 16x16 digital
(5) Sleeve 01005 (SP12 sleeve/270° degree partition)
(6) Nozzle, Type 905
1
3
2