00198654-01_UM_Nozzle_Cleaning_Station_EN - 第35页
4 Setting up and commissioning 4.1 Safety instruction for transportation User Manual SIPLACE Nozzle Cleaning Station 09/2019 35 Fig.17: Machine support points / Machine/component handling Move the machine on its wheels …
4 Setting up and commissioning
4.1 Safety instruction for transportation
34 User Manual SIPLACE Nozzle Cleaning Station 09/2019
WARNING
Damage to property on the nozzle cleaning station!
Risk of damaging the NCS if it is transported without crate or pallet.
► When transporting the NCS over longer distances, always use a pallet with the ship-
ping braces and steel spacers fitted. Please note that this is the safest way to trans-
port the placement machine.
► The suspension of the machine wheel in the nozzle cleaning station frame could be
damaged by being dragged along the floor or from impact. When you are transporting
the NCS, make sure that all the feet are clear of the floor.
► Read chapter 4 "Setting up and commissioning" [}33] of this manual through com-
pletely before transporting the machine.
► Enlist the help of a second person to watch while you lift the NCS and make sure that
the machine does not tip over to one side.
WARNING
Damage to property on the nozzle cleaning station!
Before shipping the NCS off-site, empty all machine components included in the processing
fluid and separated oil cycles. Do not move the machine with the processing fluid inside.
WARNING
Risk of damage due to excessive fork spacing!
Increased fork spacing, which means that the NCS is raised at points outside its contact
surface, can lead to deformation of the NCS frame and cause damage to cables and lines.
► The forks may only be opened to a degree which ensures that they are still within the
contact area of the NCS underside (see fig. below).
WARNING
DANGER OF CRUSHING!
Risk of crushing feet when transporting the placement machine.
► Wear special protective shoes.
4 Setting up and commissioning
4.1 Safety instruction for transportation
User Manual SIPLACE Nozzle Cleaning Station 09/2019 35
Fig.17: Machine support points / Machine/component handling
Move the machine on its wheels when
handling. Lift the machine with forklift
trucks with a minimum capacity of 500
kg and load the machine onto the forks
400 mm away from the fork carriage. Di-
mensions and fork entry points (marked
"P") - (see fig.).
The warehousing and storing of this
machine require an indoor room. Pro-
tect the machine from dust and keep its
electrical components dry. Before mov-
ing to storage, thoroughly clean the
machine of processing residues.
4 Setting up and commissioning
4.2 Configuration when delivered
36 User Manual SIPLACE Nozzle Cleaning Station 09/2019
4.2 Configuration when delivered
4.2.1 Services
As a special service, SIPLACE offers to realize the complete integration of your nozzle cleaning
station in your facility. With our extensive expertise and by using the right tools and equipment, we
can ensure that the installation process runs smoothly and efficiently. However, this will require you
to clarify the infrastructure aspects in advance and make any necessary changes at your produc-
tion facility.
4.2.2 Shipping packaging
The SIPLACE NCS and cleaning options are delivered in separate packages. The NCS is packed
in a wooden crate and the cleaning options are packed in cardboard with foam inlays.
CAUTION
Damage from condensation
To avoid damage from condensation, only open the packaging once the NCS or the com-
ponents have adjusted to the ambient temperatures. This can take up to 24 hours.
4.2.3 Checking a delivery
► Check the delivery for damage.
► Unpack the machine and the accessories and check the delivery for completeness (reference
delivery note).
► Document the results in the installation report /acceptance protocol.
4.2.4 Shipping braces
Fig.18: Transportation crate/pallet - shipping braces
The SIPLACE NCS gets delivered seated on
two wooden bars. In addition, a wooden
bracket is screwed to each side to prevent it
slipping.